[mlee]

Adding this mod to the thread.

The Carbon Fiber style shifter looks much better with this interior

[mlee]

ZL1 Add-ons lift pads to all 4 corners. I have the mag puck that lifts both front and rear tires but never can get a shop tech to use it.

Never trust shop techs.

Got these from Phastek https://www.phastekperformance.com/Z...a-01112304.htm

[Brettallen59]

I have blocks on mine also. These pictured were the first ones I bought, but I found the ones like yours and purchased those since the quality was much better. I pulled these off and installed black ones just like yours.
Brett....

[Bumbleboy92]

Originally Posted by mlee

Adding this mod to the thread.

The Carbon Fiber style shifter looks much better with this interior

Attachment 1148319

Attachment 1148318

Attachment 1148320

Attachment 1148321

Not a fan of the suede? I swapped mine but kept the suede shifter with cf top

[mlee]

Originally Posted by Brettallen59

I have blocks on mine also. These pictured were the first ones I bought, but I found the ones like yours and purchased those since the quality was much better. I pulled these off and installed black ones just like yours.
Brett....

I have an older variation on my 2019 as well but really use the magnetic puck in the center for myself. I do use the fronts when swapping the camber over on the ZLE.

Originally Posted by Bumbleboy92

Not a fan of the suede? I swapped mine but kept the suede shifter with cf top

Oh... now there's an idea. How do you get the top off?

[Bumbleboy92]

Originally Posted by mlee

I have an older variation on my 2019 as well but really use the magnetic puck in the center for myself. I do use the fronts when swapping the camber over on the ZLE.

Oh... now there's an idea. How do you get the top off?

I followed this video but found I didn’t need to do complete disassembly, just had to be careful not to damage the silver ring



Here’s the video I took when replacing my silver ring, not as good quality but hopefully makes sense

[mlee]

Originally Posted by Bumbleboy92

I followed this video but found I didn’t need to do complete disassembly, just had to be careful not to damage the silver ring



Here’s the video I took when replacing my silver ring, not as good quality but hopefully makes sense

Cool... I'll get right on that when I get the car back from PPF

[mlee]

1st Unscheduled Service to replace a dead battery. No matter how much I charged it would not start without a jump.