What is the best Wickerbill in terms of OE Appearance? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DasBaldDog · 05-09-2020, 05:52 AM

I would like to add a wickerbill and really like the OE design but not paying collector prices for the piece.

With that in mind, who has the wickerbill that looks most like the oe one (The ZL1Addons piece is nice, but I'd prefer a 1-piece design)?

Who have y'all used and how does it look? I see the clones on eBay but people say they are made of painted steel (would prefer aluminum, composite, etc).

Am aware of the Anderson one but would like to avoid the CF look if possible, though I do like them more than the ZL1Addons.

olblue75 · 05-09-2020, 07:01 AM

Check out Aero Sport Concepts he has a nice one piece called the Scar.

Biergut · 05-09-2020, 11:55 AM

Quote:

Originally Posted by olblue75

Check out Aero Sport Concepts he has a nice one piece called the Scar.

Plus 1 on Aero Sport Concepts -- Kurt is a good guy and I love the piece I received from him. He has all the information on factory specs and his Wickerbill provides the same exact adjustment up and down (8mm slot I believe, but don't quote) as the factory Wickerbill. The price is, or was, VERY reasonable.

mikeman · 05-09-2020, 12:45 PM

I have the DT Moto wickerbill spoiler on mine and it's identical in appearance to the OEM version.

SIM GhostrdrZ · 05-09-2020, 04:27 PM

My OEM wickerbill doesn’t have slots. It has 2 position holes at each screw, a high and low position. They are roughly 3/4-1” spacing between holes. It is aluminum or at least a non ferrous metal and has a gm stamping on the spoiler side of it. It is straight across on top. Looks petty plain relative to some of the aftermarket show pieces. Oh and it’s roughly .28” thick. and 52”L x 3”W. About 3” on either side is 4”W, but that is on the bottom side of the wicker, against the spoiler as to add support.
A picture would do so much more but I was being lazy today.

MX621 · 05-09-2020, 06:55 PM

eBay has aluminum ones that are decent oem copy’s. They usually sell attached to the spoiler itself. I think I paid 90$ shipped

joelster · 05-10-2020, 04:43 PM

I made one out of plexiglass. It will be very functional at low speeds. I autocross and I notice that the front end has significantly more grip than the rear. For a spoiler I used an aftermarket piece from JSP. I just sandwiched the plexiglass piece between the spoiler and the small metal wickerbill that it came with.

j o n · 05-20-2020, 09:06 AM

Interesting option, just for the included 'aluminum' wicker piece
https://www.amazon.com/EOS-Body-Rear...983332&sr=8-82

joelster · 05-21-2020, 07:00 AM

Quote:

Originally Posted by j o n

Interesting option, just for the included 'aluminum' wicker piece
https://www.amazon.com/EOS-Body-Rear...983332&sr=8-82

Mine looks exactly like that. A simple trip to a metal supply shop could produce a piece of sheet aluminum about 54"x 10". Get a sander and round the edges slightly. Use the wickerbill that's on the spoiler as a template to lay out where the holes go.

aris · 05-22-2020, 04:38 PM

How much are OEM wickerbill going for now?? I didn't even realize they were hard to come by now. Glad I picked mine up from the dealer when I first got the car!

johna · 05-22-2020, 07:49 PM

I think the OEMs are going for between 800 to 1000.

Sent from my iPhone using Tapatalk

ktm010 · 05-22-2020, 08:53 PM

This was from Moreno Motorsports

05-09-2020, 05:52 AM	#1
DasBaldDog Drives: 2017 Focus RS Join Date: Nov 2017 Location: Loganville, GA Posts: 177	What is the best Wickerbill in terms of OE Appearance? I would like to add a wickerbill and really like the OE design but not paying collector prices for the piece. With that in mind, who has the wickerbill that looks most like the oe one (The ZL1Addons piece is nice, but I'd prefer a 1-piece design)? Who have y'all used and how does it look? I see the clones on eBay but people say they are made of painted steel (would prefer aluminum, composite, etc). Am aware of the Anderson one but would like to avoid the CF look if possible, though I do like them more than the ZL1Addons.

05-09-2020, 07:01 AM	#2
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	Check out Aero Sport Concepts he has a nice one piece called the Scar. __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

05-09-2020, 12:45 PM	#4
mikeman Banned Drives: 2015 Camaro Join Date: Aug 2018 Location: My Garage Posts: 1,125	I have the DT Moto wickerbill spoiler on mine and it's identical in appearance to the OEM version. Last edited by mikeman; 05-09-2020 at 09:15 PM.

05-10-2020, 04:43 PM	#7
joelster Drives: '94 Z28+ '15 Z/28 Join Date: Jun 2009 Location: Cheektowaga, NY Posts: 1,282	I made one out of plexiglass. It will be very functional at low speeds. I autocross and I notice that the front end has significantly more grip than the rear. For a spoiler I used an aftermarket piece from JSP. I just sandwiched the plexiglass piece between the spoiler and the small metal wickerbill that it came with. __________________ 1973 Mach 1, 351C cruiser '15 Z/28 Red Hot, A/C 1980 Z28- resto-mod project 1979 Y84 Trans Am 1986 IROC-Z

05-20-2020, 09:06 AM	#8
j o n Drives: 2015 Z/28 #0058 Join Date: Apr 2018 Location: Pittsburgh, PA Posts: 814	Interesting option, just for the included 'aluminum' wicker piece https://www.amazon.com/EOS-Body-Rear...983332&sr=8-82 __________________ Current: - '15 Z/28 #0058 \| White \| A/C \| Speakers \| Michelin PS4S 305/30/19's - '22 Ridgeline RTL \| White \| Ebony, '22 CR-V EX-L Hybrid \| White \| Ebony Sold: - '15 Z/28 #0048 \| White \| A/C \| Speakers \| Michelin PS4S 305/30/19's https://www.instagram.com/__jon__athan__/

05-09-2020, 04:27 PM	#5
SIM GhostrdrZ Drives: ‘14 Z/28 ‘14 ZL1 M6 vert Join Date: Jul 2015 Location: Ohio Posts: 1,283 View My Garage	My OEM wickerbill doesn’t have slots. It has 2 position holes at each screw, a high and low position. They are roughly 3/4-1” spacing between holes. It is aluminum or at least a non ferrous metal and has a gm stamping on the spoiler side of it. It is straight across on top. Looks petty plain relative to some of the aftermarket show pieces. Oh and it’s roughly .28” thick. and 52”L x 3”W. About 3” on either side is 4”W, but that is on the bottom side of the wicker, against the spoiler as to add support. A picture would do so much more but I was being lazy today.

05-09-2020, 06:55 PM	#6
MX621 Drives: 2014 z28 Join Date: Oct 2018 Location: DE Posts: 171	eBay has aluminum ones that are decent oem copy’s. They usually sell attached to the spoiler itself. I think I paid 90$ shipped

05-22-2020, 04:38 PM	#10
aris Drives: Z/28 Join Date: Jan 2015 Location: Bay Area Posts: 276	How much are OEM wickerbill going for now?? I didn't even realize they were hard to come by now. Glad I picked mine up from the dealer when I first got the car!

05-22-2020, 07:49 PM	#11
johna Drives: 2015 White Z28 Join Date: Aug 2018 Location: Chicago Posts: 113	I think the OEMs are going for between 800 to 1000. Sent from my iPhone using Tapatalk

05-22-2020, 08:53 PM	#12
ktm010 Drives: 2015 Sierra Denali Join Date: May 2011 Location: ny Posts: 13	This was from Moreno Motorsports Attached Images