[RoaringV8]

I'm looking to see if any one has experience with a dealer or shop in the Philadelphia area that they would recommend for getting an alignment. I'm looking to do a fairly aggressive track alignment and have read that the camber bolts need to be adjusted to get past -2.0 camber up front. Sounds like many places don't have the experience to know how to do it well. Appreciate any suggestions.

[Kmeleon]

Not sure exactly how far it is but these guys did my track alignment, they're not too far from Philly.

http://www.randsautospecialists.com/

They're mostly Mustang guys but for what I've used them for (track alignment, brake fluid swap, inspections) they've been great. And you can sit there while they do it.

[RoaringV8]

Thanks for the suggestion! Out of curiosity, what did you have your track alignment set to? How much negative camber were they able to go in the front? I assume you have stock camber plates?

[Kmeleon]

Oh sorry, didn't see your reply until now. They had a bit of an issue getting the track alignment spec but 5 minutes on the internet and they figured it out. I went with the standard track alignment of -2.0 and -1.5 since I do use it for considerable street driving in the warmer months.. Stock plates still on my car. My treadwear looks great.