11-15-2021, 05:10 PM | #1 |
Drives: 2012 Camaro SS 45th Anniversary Join Date: Aug 2020
Location: Houston
Posts: 60
|
1LE Reps on SS with 315s?
Planning on getting MRR M017 wheels and throwing some 285/30/20 up front and 315/30/20 on the back. I want to get rid of the wheel gap. I was thinking of the RST PX1 1.5” lowering springs from Phastek. I don’t have mag ride. Would those springs be able to fit that wheel setup? Or does anybody have pictures or suggestions on what springs I should run? I’m already planning on relocating the rear wiring harness that is a common problem with similar setups and in addition, some have used 5mm spacers in the rear. Would I need to use spacers in the back to fit the 315s? I don’t want any tire tuck at all, just want it low enough to get rid of the wheel gap.
|
11-15-2021, 05:37 PM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
may be too low and i dont recommend those springs check out the yyz springs
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
12-08-2021, 09:03 PM | #3 |
Drives: 2016 Camaro Join Date: Oct 2017
Location: Texas & Uncle Sam's Choice
Posts: 123
|
I've got Eibach one-inch drop springs with the factory magnetic ride control. It's the perfect change. Part Number 38144.140. I fit the 285/30/20 and 305/30/20 EAGLE F1 SUPERCAR 3 tires perfectly. I'm confident I can go 295/30/20 in front and 315/30/20 in back without spacers or modification. Watch the brand of tire you go with as they all have slightly different profiles. My wheels are factory reproduction brand 10"x20" and 11"x20".
__________________
2024 Chevrolet 3500HD Z71, LTZ, 4x4, 6.6 ltr. L5P long-bed.
2016 Camaro 2SS Six-speed, Hotchkis sway bars, Eibach .750" drop springs, Mamo throttle body, E85, BMR stuff. 2006 Quicksilver 6-speed GTO ERL LS3-430, All-Pro 285cc heads, 262/273 .758/.742 116+3 cam, Sheet-metal Intake, 70lb Siemens injectors, SLP, GMM Ripshifter, QA1 Coil-overs front and rear, nylon suspension bushings, Hotchkis, RPM Trans, SPEC twin clutch, SpinTech, Kooks 1 7/8 -2.0", BMR drive train, Kaaz 3.91, Lingenfelter CAI, Baer brakes, mini-tubs, E85. |
01-30-2022, 11:03 PM | #4 | |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
Quote:
|
|
|
|
Post Reply
|
Tags |
1le, lowered, replicas, spacers, springs |
|
|