2016 Camaro SS & LT NPP Fuse Pull Guide

Sledgehammer70 · 02-23-2016, 12:30 AM

Looking to keep your NPP open all the time no matter what on your SS and LT? Pulling that fuse is simply what you need to do. Just make sure you snag the right one. See my quick guide below.

Sound clip:

Update:
I have heard this trick can cause issues on the 2017 cars. CEL'S, valves still closing, etc.

On the 2016 cars the fuse pull causes the valves to remain open no matter what.

sleep4fun · 02-23-2016, 09:08 AM

I see in your video you used needle nose pliers. There is a white "grabber" located in the fuse box.

Sledgehammer70 · 02-23-2016, 09:46 AM

Quote:

Originally Posted by sleep4fun

I see in your video you used needle nose pliers. There is a white "grabber" located in the fuse box.

HA! I had no idea that was there lol. Learn something new everyday.

doc212121 · 02-23-2016, 03:40 PM

Sledge
I gotta say, if that was a "quick" video, I would hate to see a detailed video! My ADD shut me down 45 seconds in.
LOL all in good fun brother, nice color choice!

Sledgehammer70 · 02-23-2016, 04:25 PM

Quote:

Originally Posted by doc212121

Sledge
I gotta say, if that was a "quick" video, I would hate to see a detailed video! My ADD shut me down 45 seconds in.
LOL all in good fun brother, nice color choice!

Ha! Next time I will make the video and just increase the speed by 200%. I have a bad habit of talking a lot.

i007spectre · 02-23-2016, 05:37 PM

My main question is if pulling the fuse gets rid of the passenger side NPP exhaust rattle. If so I may pull mine until GM gets a permanent fix worked out.

Sledgehammer70 · 02-23-2016, 05:39 PM

Quote:

Originally Posted by i007spectre

My main question is if pulling the fuse gets rid of the passenger side NPP exhaust rattle. If so I may pull mine until GM gets a permanent fix worked out.

Yes, the fuse pull will make that go away. At least it did for me.

BadBillyJack · 02-23-2016, 06:25 PM

Nice! Now we need a new exhaust video!!

doc212121 · 02-24-2016, 07:41 AM

Quote:

Originally Posted by Sledgehammer70

Ha! Next time I will make the video and just increase the speed by 200%. I have a bad habit of talking a lot.

My fiance' tells me the same thing lol

laynlo15 · 02-25-2016, 10:17 PM

I'll do it tm. Love the sound when you remote start it for friends. That can't believe the sound of a stock exhaust that sounds that good and it does. thx again

i007spectre · 02-28-2016, 11:57 AM

Quote:

Originally Posted by Sledgehammer70

Yes, the fuse pull will make that go away. At least it did for me.

Mine must be really bad then. Pulled the fuse yesterday and I still get the rattle. Granted it doesn't sound quite as loud, but it's still there. I'm so ready for a permanent fix from GM.

Adrian97c · 02-28-2016, 02:03 PM

Quote:

Originally Posted by i007spectre

Mine must be really bad then. Pulled the fuse yesterday and I still get the rattle. Granted it doesn't sound quite as loud, but it's still there. I'm so ready for a permanent fix from GM.

Hope that gets fixed before my order gets built!

Sent from my iPhone using Tapatalk

Adrian97c · 02-28-2016, 02:10 PM

Plug in AFM Delete module to ODBII port to shut off AFM mode without getting errors. I saved mine from my 5th gen.

Sent from my iPhone using Tapatalk

Sledgehammer70 · 02-28-2016, 03:39 PM

Quote:

Originally Posted by Adrian97c

Plug in AFM Delete module to ODBII port to shut off AFM mode without getting errors. I saved mine from my 5th gen.

Sent from my iPhone using Tapatalk

Just don't forget to remove it when not driving. It can drain your battery.

02-23-2016, 05:37 PM	#6
i007spectre Drives: 2016 2SS, 2008 HHR ECTO-2H Join Date: Aug 2009 Location: Springfield, Mo Posts: 1,927 View My Garage	My main question is if pulling the fuse gets rid of the passenger side NPP exhaust rattle. If so I may pull mine until GM gets a permanent fix worked out. __________________ 2016 Camaro 2SS. Hyper Blue, Ceramic White, Auto, MRC, and NPP. 1100 - 9/25 2000 - 9/28 3000 - 9/30 3100 - 10/27 3300 - 10/28 3400 - 10/29 TPW 11/09 3800 - 11/10 4300 - 11/24 4B00 - 11/25 4200 - 12/5 5000 - 12/7 6000 - 12/11

02-25-2016, 10:17 PM	#10
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	I'll do it tm. Love the sound when you remote start it for friends. That can't believe the sound of a stock exhaust that sounds that good and it does. thx again __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

02-28-2016, 02:10 PM	#13
Adrian97c Drives: Wife's 14' IS 250 Join Date: Mar 2014 Location: PSL, FL Posts: 2,207	Plug in AFM Delete module to ODBII port to shut off AFM mode without getting errors. I saved mine from my 5th gen. Sent from my iPhone using Tapatalk __________________ 2016 Camaro HBM A8, 2SS, NPP, Sunroof, Kalahari Interior/kneepads, Black bowties, 56v: -11% tint all around Ordered • 2/06/16 Built on • 3/22/16 Adopted • 4/07/16 Sold on 2/05/16: 2014 Camaro SW L99, 2SS, RS, NAV, Inferno Orange Interior: -Borla ATAK catback -Range AFM delete -15% tint all around -Red LED interior bulbs -55k white Cree LED fogs -License plate LED bulb swap -12" Sub Kit, BA amp swap -Oracle ghosted LED sidemarkers

02-23-2016, 09:08 AM	#2
sleep4fun Drives: Nightfall Gray 1SS M6 Join Date: Oct 2011 Location: East Bay Area Posts: 152 View My Garage	I see in your video you used needle nose pliers. There is a white "grabber" located in the fuse box.

02-23-2016, 03:40 PM	#4
doc212121 Drives: 2016 Camaro 2SS White/White Join Date: Jan 2010 Location: Michigan Posts: 351	Sledge I gotta say, if that was a "quick" video, I would hate to see a detailed video! My ADD shut me down 45 seconds in. LOL all in good fun brother, nice color choice!

User Name		Remember Me?
Password