You are browsing camaro5 
 |
|
03-28-2020, 10:24 PM
|
#1 |
      Drives: 2011 Camaro SS 6sp Join Date: Nov 2016
Location: Drivers Seat
Posts: 1,904
|
What do we know about VMS Drag Racing Wheels?
The price is good, which usually means the wheels are not. Does anyone have these and can you comment on the quality and your experience with them?
https://www.vmsracing.com/products/c...6-part-vwst015
__________________
2011 Camaro SS---SOLD
TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Edlebrock Pro Flo XT 1158whp 1017wtq. 2010 CTS-V A6 - "Stock" SOLD 630whp 658wtq 2024 F-150 RCSB 5.0 4x4 waiting for tunes... |
|
|
|
03-30-2020, 03:04 AM
|
#2 |
|
Drives: 2011 Camaro SS 6sp Join Date: Nov 2016
Location: Drivers Seat
Posts: 1,904
|
Not much it seems. Looks like they are cast, cheap, and u get what u pay for....
__________________
2011 Camaro SS---SOLD
TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Edlebrock Pro Flo XT 1158whp 1017wtq. 2010 CTS-V A6 - "Stock" SOLD 630whp 658wtq 2024 F-150 RCSB 5.0 4x4 waiting for tunes... |
|
|
|
|
03-30-2020, 12:43 PM
|
#3 |
 Drives: 2015 SS 1LE Join Date: Jul 2018
Location: Longwood, FL
Posts: 92
|
I reached out to them months ago when they first came out with a set for our camaros to be a test car. Was unable to make the trip to Miami at the time. They seem nice, I think they look good too. I have not seen them in person but for a full set of wheels it’s a good price. They had a 15% off over the holidays as well. May not be a bad idea to hold out and see if they run any specials unless your in need now.
__________________
(SOLD) 2015 SS 1LE- ESS V3 supercharged, ID850, Corsa extreme catback, Stainless Power 1 7/8 LT, ADM FPCM, JMS BAP
|
|
|
|
|
03-30-2020, 01:20 PM
|
#4 |
Drives: 2012 Camaro SS Join Date: Dec 2019
Location: New York
Posts: 1,434
|
They look pretty good and not that cheap. I would get them for the occasional dig races
__________________
2012 Camaro 2SS/RS - CSP Custom Cam 232/240 .615/.615 113 +3, Texas speed CNC heads, FTI billet triple disc converter, K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, tru cool 40k trans cooler, apex scoop, Pedders extreme coil overs and much more!!
|
|
|
|
|
03-30-2020, 01:41 PM
|
#5 |
 
Drives: 6th Gen NicKey Camaro & others. Join Date: Nov 2015
Location: Loves Park, Illinois
Posts: 492
|
That is a cheap price, no doubt
|
|
|
|
|
10-05-2020, 10:51 AM
|
#6 |
|
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,041
|
I see a ton of them on Mustangs and Camaros at Carolina dragway. Most of the cars running them are in the low 11's.
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
|
|
|
|
10-15-2020, 06:40 PM
|
#7 |
|
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,041
|
I bought a set from beefcake. Had them in 2 days. I bought MT 28x6x18 Radial for the front and 28x10.5x 17 MT pro drag radial slicks for the back. I now know several guys that have the VMS on 5th gens and 6th gens some trapping at 127 to 130mph - had them on for a while and no issues. I can confirm that the 18x5 fronts clear ZL1 front brakes. Was hoping to try them out soon - but broke something in the diff.
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
|
|
|
|
12-02-2020, 11:13 AM
|
#8 |
|
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,041
|
Here are some pics with the shoes mounted....
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
|
|
|
|
12-02-2020, 02:42 PM
|
#9 | |
|
Quote:
__________________
2014 Camaro SS L99, Ashen Grey w/Black Leather - Build thread - http://www.camaro5.com/forums/showthread.php?t=491561
Mods - GPI 416 w/Custom Grind Cam, Ported Heads & Tuned by Ben, Mag Heartbeat, ZL1 Fuel Pump & DSX Aux Pump, NW 103 TB, FIC 1650's, Alky Meth, Circle D 3600 Triple Disc, RPM 5” CAI, Kooks Headers, Solo Cat Back, Viking Coil Overs & all the BMR Goodies in the rear, Zl1 3.23 Diff, DSS Axles, Gulfcoast Driveshaft, Hendrix Offset Diff Bushings, AFE Solid Subframe Bushings, 875HP/843TQ 5FDP |
|
|
|
|
|
12-02-2020, 03:05 PM
|
#10 | |
Drives: 2015 2SS A6 Commemorative Edition Join Date: Nov 2019
Location: Utah
Posts: 433
|
Quote:
|
|
|
|
|
|
12-02-2020, 04:07 PM
|
#11 |
|
Evil Genius of Chevrolet
Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017
Location: New York
Posts: 3,260
|
Do those rims use lug nuts that have a shank shaft all the way through the wheel or acorn style?
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
|
|
|
|
|
12-02-2020, 05:43 PM
|
#12 |
 
Drives: 2014 SS 2010 SS 93 Camaro z28 Join Date: Apr 2017
Location: Ohio
Posts: 254
|
I have a set also there pretty nice for 250 each there are some people selling them out side of VMS same price think the set is 960ish I bought mine from 2 different people. The lugs are acorn style and there is a slight issue with that, a 14 mm lug with a socket on it don’t fit in the hole to tighten up the lug so either have to run a long (2” I believe) or a smaller 14mm lug really not a big deal. IMO for a 250.00 you can’t go wrong good luck Tommy
|
|
|
|
|
12-03-2020, 07:41 AM
|
#13 | |
|
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,041
|
Quote:
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
|
|
|
|
|
12-03-2020, 07:43 AM
|
#14 |
|
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,041
|
The acorn lugs from my forgestars fit just fine...
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
|
|
|
|
|
|
|
 |
|
|
