03-07-2015, 06:14 PM | #1 | |
Drives: z28 Join Date: May 2014
Location: ct
Posts: 54
|
AMERICAN RACING FULL SYSTEM
We just picked up our 2015 z/28 from American racing headers after being fitted with their rear muffler section. It's 3" all the way back, leading into 4" double wall polished stainless tips.
This car also has the American racing long tube headers, as well as their catless x-pipe. We powder coated the tips gloss black for that "stealth" look. System fits like a glove & sounds awesome ! Once the weather breaks here in sunny CT we will upload some driving videos ! Enjoy.. Last edited by P1M; 03-08-2015 at 09:51 AM. |
|
03-07-2015, 06:34 PM | #2 |
Ed
Drives: 2013 AGM Camaro 2SS/RS/1LE Join Date: Dec 2012
Location: Seattle, WA
Posts: 951
|
says Video is private.
|
03-07-2015, 07:21 PM | #3 |
Drives: '13 Hot Wheels & '14 Z/28 Join Date: Jun 2010
Location: Murfreesboro
Posts: 288
|
That's is sweet!
__________________
2013 Hot Wheels Camaro #63 SS 6-Speed. All stock and keeping it that way.
2014 Z/28 #119 A/C car(not by choice, ordered wrong) All stock and plan to keep it that way. The kid in me wants to mod the Hell out of it but the adult says it will be worth more years down the road. The 2 of them need to stop fighting! 1983 Chevrolet C10 lowered and restoring. 1986 Chevrolet K10 6 in lift, 35's,restored daily driver for my son. 2013 Hot Wheels Camaro. Life Size Toy.. 2014 Z/28 my weekend stress reliever! 2015 Checy Sonic RS 2015 Chevy Equinox |
03-08-2015, 08:16 AM | #4 |
Drives: 2014 Z/28 Join Date: Jan 2015
Location: NJ
Posts: 40
|
Is this a Z/28 specific exhaust or did they use a ZL1 rear section?
|
03-08-2015, 09:18 AM | #5 | |
Drives: Pontiac G8 GT Join Date: May 2009
Location: new york
Posts: 263
|
Quote:
Tom thank you for posting the pictures and video. Enjoy! Nick A.R. Headers |
|
03-08-2015, 11:07 AM | #6 |
Drives: 2013 silver ZL1 Join Date: Apr 2013
Location: colorado springs co
Posts: 226
|
Did you have to tune for this system?
__________________
2015 Z28 Black #16 600rwhp N/A
Colorado speed and performance build: hand ported heads, titanium valves, hand ported throttle body,fast lsxr intake, custom cut lunati cam, lunati push rods, fm high performance lifters, dual beehive springs + titanium retainers, trunnions upgrade, ARH headers + x pipe, fast fuel rails, c5r timing chain, katech high volume oil pump, ati underdrive pulley, Taylor wires. Sold---2013 ZL1 M6 Silver Ice Metallic: 767 rwhp |
03-08-2015, 11:59 AM | #7 |
Drives: Candy Join Date: Aug 2014
Location: Cleveland, NY
Posts: 324
|
I like the black tips.
|
03-08-2015, 12:42 PM | #8 |
Drives: 2021 300 Join Date: Jan 2015
Location: New Jersey
Posts: 968
|
Be careful in NJ, NY, CT as of 2013 when your car go's for its emission test the inspectors have to physically check the cats are there.
From there web site! "Welcome to the Connecticut Emissions Program Your vehicle will be visually inspected for the presence of the catalytic converter, which was originally installed by the vehicle’s manufacturer. The catalytic converter is a post-combustion control device that converts toxic exhaust emissions from your vehicle’s engine into non-toxic substance. It must be fully intact for your vehicle to be considered for an emissions test. Removal of or tampering with a catalytic converter is a federal offense. If your vehicle is missing a catalytic converter, it will fail the emissions test." This was added to most of the states with state emission inspection as of 2013. My dealer has a 2010 SS that the State Police took off the road several months ago, the car owner is still dealing with the charges. |
03-09-2015, 02:43 PM | #9 |
Cone Killer
Drives: 2012 SS Join Date: Dec 2013
Location: St. Albans, West Virginia
Posts: 832
|
P1M, how would you say the sound is, comparing the American Racing setup to the factory Z/28 exhaust with the flaps open? I'm looking at catbacks (for my lowly SS) and the ARH catback and OEM Z/28 catback are both high on my list. I'd appreciate a little insight from some one who's driven both. Thanks!
__________________
2012 Camaro SS - Sold
Selling off my remaining wheels, tires, 27mm front sway bar, and MGW shift knob. Get them out of my house before my wife puts me out! |
|
|
|
|