02-03-2021, 04:29 PM | #1 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,150
|
Suspension settling?
Hey everyone kind of a weird question. I swapped out my stock rims and tires on my zl1 this past weekend and noticed that i can no longer place the jack under to jack up the front tires on my zl1 addon pads without having to go from the middle of the door frame and dragging the jack towards the front because the front sits too low now. I am almost positive i was able to go straight in from the front and jack it up before. Has my suspension "settled" and now i'll need a lower jack for the front or is there something actually wrong with the front suspension? thanks for any help!
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| AWE Touring Catback Exhaust| TCM Tune| Tune| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
02-03-2021, 04:53 PM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
i jack up my car using the rear lift point and because my suspension is so stiff i can lift the whole side up with one jack point...i do use the zl1 addons hockey puck and jack but i have to put my rear wheels on wood first
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
02-03-2021, 06:17 PM | #3 |
Drives: 2018 Camaro ZL1 Join Date: Aug 2018
Location: Georgia
Posts: 1,370
|
Did you put on the exact same size rims and tires?
|
02-03-2021, 07:38 PM | #4 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,150
|
Haha yes, good catch, they were from an identical stock ZL1
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| AWE Touring Catback Exhaust| TCM Tune| Tune| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
02-03-2021, 07:48 PM | #5 |
Drives: 2018 Camaro ZL1 Join Date: Aug 2018
Location: Georgia
Posts: 1,370
|
Just checking. Though not every tire is the same size, even though it's stamped on the side, it could sit a little lower or higher.
I have noticed that my jack isn't all the way down and caused it not to be able to get under the front lift point. I would think the suspension wouldn't settle much, if not any. Though this is a question that I haven't seen asked on here before. If I were near my car, I'd take a measurement for you. |
02-04-2021, 08:46 AM | #6 | |
Drives: 2017 Hyper Blue A10 ZL1 Join Date: Dec 2016
Location: New England
Posts: 716
|
Quote:
__________________
- Life is a highway... I want to ride it all night long...
Sold 2010 997 GT3, 2016 WRX, 2006 997 C2S, 2003 996 C4S, 2001 Boxster S, 1997 E420 AMG etc.. |
|
|
|
Post Reply
|
|
|