09-19-2020, 03:22 PM | #23745 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
I know it man, I rarely ever do either. I have a full pressure washer & foam cannon setup and routine that I use every time I wash the car. This was after my car was sitting for over a month and right when I finished my cam swap. So on a datalog run one day I was passing the car wash and figured what the hell, get it a bit cleaner before I wash it at home. It was pure laziness and stupidity on my part.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
09-19-2020, 08:19 PM | #23746 |
Drives: 2013 Camaro 2SS/RS Join Date: Aug 2020
Location: Pacific Northwest
Posts: 802
|
I installed a Volant air cleaner. I did not get a check engine light when I restartged the car. It seems to sound the same as before the filter so I am going to believe that I will get a few more horsepower anyway. I do not know if I got the filter box to set far enough down into the engine bay because when I close the hood it seem that the top of the hood is not flush with the fender by about 1/16 inch.
Last edited by BuddyLee; 09-19-2020 at 08:32 PM. |
09-20-2020, 09:16 AM | #23747 |
Drives: LT W/2LT,blue metallic Join Date: Jul 2016
Location: central florida
Posts: 4,915
|
busted out the random orbital polished,gave it a shot of ultimate compound all over and a good coat of wax.hadnt been done since march,florida summers are brutal.
|
09-20-2020, 01:54 PM | #23748 |
It don’t come easy.
|
Fixed the known driver’s side heated seat issue. It didn’t show itself to me easy. Had to probe around a bit to see where it was not connected. A cool bottle of O’doul’s Amber and about an hour and now it’s time for a ride.
__________________
|
09-20-2020, 02:03 PM | #23749 |
Drives: camaro Chevrolet Join Date: Sep 2020
Location: kansas
Posts: 2
|
Hi, today I took mine for a service, then drove 243 miles as part of the test after service. it was perfect!!
|
09-20-2020, 05:30 PM | #23750 |
Drives: 2014 Camaro 2SS Join Date: Sep 2020
Location: NC
Posts: 24
|
Tinkering around. Reset the tire pressure sensors and finally got that Diablo Sport OBD plug in to get rid of that annoying AFM noise. Much better now.
|
09-20-2020, 05:52 PM | #23751 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
Yeah they are man, it takes everything out of you. I got a nice DA polisher and pad set recently but its been so damned hot and also raining so dang much that I haven't bothered. Autumn and winter are the only time of the year down here I can get any enjoyment out of my paint and washes. Too hot and wet in the summer and in the spring everything is covered in yellow oak tree pollen. Worst part is I have 2 giant Florida Live Oaks that hang over my driveway.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
09-20-2020, 05:54 PM | #23752 | |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
Quote:
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
09-20-2020, 06:00 PM | #23753 |
Drives: LT W/2LT,blue metallic Join Date: Jul 2016
Location: central florida
Posts: 4,915
|
what makes it worse is i work in a huge non air conditioned warehouse...hot as hades.will be glad to see autumn weather and feel like going to car shows again,and im retiring in november.
|
09-20-2020, 07:58 PM | #23754 |
Drives: 2014 Ashen Gray Convertible Join Date: Apr 2017
Location: Havelock, NC
Posts: 1,328
|
I have been a bit under the weather for several weeks and have not taken the Camaro out since mid July. Well today it was a beautiful cool day so off came the cover and away we went. God I enjoy that car as much as I did on day ONE! Just turned over 30K now and I still get all fidgety when I set in her and drive. It's really mine! Who says a car can't make an old man smile!
__________________
|
09-20-2020, 08:04 PM | #23755 |
Drives: 12 2SS/RS L99,11 2SS/RS LS3totaled Join Date: Jun 2019
Location: mooresville nc
Posts: 1,048
|
got intimate with her did a hand wash and window clean. next wash she is going to get a rub down with a clay bar
|
09-21-2020, 02:11 PM | #23756 |
Drives: Yellow Join Date: Mar 2017
Location: Back Road lurking
Posts: 7
|
Have any of you guys/gals experienced any problems with ordering a Throttle Body from Overkill? I paid but haven't recieved ANY update. Thankfully I paid through PayPal so I can request a refund. Any suggestions???
|
09-21-2020, 03:17 PM | #23757 | |
|
Quote:
Good luck |
|
09-21-2020, 07:58 PM | #23758 |
Drives: Yellow Join Date: Mar 2017
Location: Back Road lurking
Posts: 7
|
Well that sucks, especially after you spend your hard earned money
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 07:33 PM |
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS | Info@PeddersUSA.com | USA - Texas | 39 | 02-01-2010 12:48 PM |
Answeres to questions I have stumbled on | dieseldave24v | 5th Gen Camaro SS LS LT General Discussions | 13 | 02-23-2009 06:56 PM |