FS: OEM Z/28 manifolds & cats - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ron123 · 12-27-2019, 03:03 PM

MrRaZ28,
Your welcome! Great doing business with you. Your Shipping Prep was excellent. Arrived with no damage. And ALL the parts will be put to good use ... thanks for adding in all the hardware and extra shields.
1/8" sleeve on my factory NPP Performance dual mode exhaust should be all that is needed to install.

Did some polishing using fine Bronze Wool. Stainless steel buffing compound and buffer.
Shiny enough could see my reflection in the Tri-Y header and also the top surface shows the blue sky above and blue car wash soap :-)
Buffed the brackets to a shine and black ceramic coated them.

12-27-2019, 03:03 PM	#15
ron123 Drives: 2014 2SS/RS Join Date: Dec 2014 Location: Raleigh, NC Posts: 1,053	MrRaZ28, Your welcome! Great doing business with you. Your Shipping Prep was excellent. Arrived with no damage. And ALL the parts will be put to good use ... thanks for adding in all the hardware and extra shields. 1/8" sleeve on my factory NPP Performance dual mode exhaust should be all that is needed to install. Did some polishing using fine Bronze Wool. Stainless steel buffing compound and buffer. Shiny enough could see my reflection in the Tri-Y header and also the top surface shows the blue sky above and blue car wash soap :-) Buffed the brackets to a shine and black ceramic coated them. Attached Images __________________ 2014 2SS/RS, Z28 CAI and High Wing Spoiler, ZL1 5.1:1 Ratio Short-Throw Shifter, ZL1 Pedals, ZL1 splash guards, NPP Dual-mode quad tip exhaust, Z28 strut tower brace, Camaro LED Cup-holders with footwell Lighting option, Leather visors, and Leather E-brake boot. Chevy dealer sponsored 67 retro SS nose stripe package. Last edited by ron123; 12-27-2019 at 03:17 PM.