11-13-2019, 01:05 PM | #1 |
Drives: Fastish Join Date: Jan 2019
Location: Florida
Posts: 228
|
WTS:18x11 and 18x12 BC Forged Track Wheels RZ05 in Black
You can see my full write up and pics here:
https://www.camaro6.com/forums/showthread.php?t=549850 I like them so much, I had BC make me two completely new sets that do not require a rear spacer. **THIS SET REQUIRES A 8MM spacer if you are going to stuff 345 hoosiers under it. I will include the spacer. ***These are/were used as Track wheels- They are dirty, and the edges have powdercoat coming off (I will update pics shortly below) **** I did run extended studs in the rear as I track the car. May not be entirely necessary if you dont. Currently they have a set of too small Michelin Blues on them (27 series front, 30 series rear) Tires are really too narrow for my purposes. I love the wheels, but you will still get some slight inner fender liner rub in the rear. No issues at all with front. I am set at track settings -2.7 Up front, -2.1 rear Asking $3k shipped for the set with or without tires Will be ready to ship Next Week Pics when new: |
11-13-2019, 01:23 PM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,812
|
what are you switching to or are you selling the car?
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
11-13-2019, 01:47 PM | #3 |
Drives: Fastish Join Date: Jan 2019
Location: Florida
Posts: 228
|
|
11-13-2019, 01:50 PM | #4 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,812
|
oh nice same company/size?
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
11-13-2019, 01:51 PM | #5 |
Drives: Fastish Join Date: Jan 2019
Location: Florida
Posts: 228
|
Reading... LOL
"I like them so much, I had BC make me two completely new sets that do not require a rear spacer." |
11-13-2019, 01:51 PM | #6 | |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,812
|
Quote:
haha my bad i didnt see that
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
|
11-13-2019, 09:12 PM | #7 |
Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,319
|
I assume +11 offset in the front? What is the rear offset (not taking into account the 8mm spacer)? What offset are you changing to?
|
11-14-2019, 06:09 AM | #8 |
Drives: Fastish Join Date: Jan 2019
Location: Florida
Posts: 228
|
+9 front
+54 rear |
11-17-2019, 08:10 AM | #9 |
Drives: 19 ZLE A10,17 SS 1LE, 16 C7R,CT5V Join Date: Feb 2017
Location: Berryville, VA
Posts: 175
|
Is the inner fender rub on 345 hoosiers only?
|
11-17-2019, 08:32 AM | #10 |
Drives: Fastish Join Date: Jan 2019
Location: Florida
Posts: 228
|
|
11-17-2019, 12:39 PM | #11 |
Drives: 19 ZLE A10,17 SS 1LE, 16 C7R,CT5V Join Date: Feb 2017
Location: Berryville, VA
Posts: 175
|
Got pics of the rub? How bad is it?
|
11-17-2019, 01:06 PM | #12 |
Drives: Fastish Join Date: Jan 2019
Location: Florida
Posts: 228
|
Yes. Just runs the liner a touch on both sides
|
11-18-2019, 04:01 PM | #13 |
Drives: 2018 ZLE Join Date: Jun 2019
Location: NC
Posts: 66
|
The driver side rear is the one you need to worry about with the wiring harness. I currently run 345/30/19 Hoosiers in rear with stock offsets and have no issues. Just curious why you didnt go with stock offset when ordering these wheels?
|
11-18-2019, 04:27 PM | #14 |
Drives: Fastish Join Date: Jan 2019
Location: Florida
Posts: 228
|
We were going to 18” and 35 profile. So that’s what the guys at bc forged picked
|
|
|
Post Reply
|
Thread Tools | |
|
|