Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Camaro Issues / Problems | Warranty Discussions | TSB and Recalls


Phastek Performance


Post Reply
 
Thread Tools
Old 05-21-2020, 10:02 AM   #1
Amadis11
 
Drives: Camaro 2018 LT1
Join Date: Dec 2019
Location: Poland
Posts: 12
P0532

Hello, I have problem with my 2018 LT. It shows P0532.

0.00 V on A/C high pressure sensor in GDS.

0 V on +5v reference, GND has 50ohms to any ground when checked with multimeter. I think wire is damaged somewhere. Can you send me ECM pinout for A/C high pressure sensor, so I could check wire ?

In GDS all +5V references are marked as ok.

Fan is always working as effect of p0532 error, a/c of course don't work. A/C if full of refrigerant, compressor relay and clutch work.

I have TPMS error too, because of one new sensor, but waiting for tpms tool. I don't think it is connected.

Thank you in advance!
Amadis11 is offline   Reply With Quote
Old 05-29-2020, 03:35 AM   #2
Amadis11
 
Drives: Camaro 2018 LT1
Join Date: Dec 2019
Location: Poland
Posts: 12
Anyone ?
Amadis11 is offline   Reply With Quote
Old 05-29-2020, 09:39 AM   #3
avalonandl

 
avalonandl's Avatar
 
Drives: 2019 ZL-1
Join Date: Feb 2009
Location: Troy, MI & Naples, FL
Posts: 2,019
Thats a take it to the dealer code IMHO... AC switch not getting voltage....
__________________
2019 ZL-1 Acquired 4/23/21 at 6300 miles. Riverside Blue, A10, PDR. Traded in 2017 2SS with 6M and 32k miles. Continental Extreme Contact Sports. Now has 10,000 miles...

2012 Yukon XL Denali w/ 6.2 AWD
avalonandl is offline   Reply With Quote
Old 05-31-2020, 02:12 PM   #4
Amadis11
 
Drives: Camaro 2018 LT1
Join Date: Dec 2019
Location: Poland
Posts: 12
Thank you for reply, but the problem is I bought this car on my own from USA to Poland and have no warranty.
Amadis11 is offline   Reply With Quote
Old 06-01-2020, 01:35 PM   #5
nancygrl
雪の玉
 
nancygrl's Avatar
 
Drives: '22 Z71 RST Silverado
Join Date: Feb 2011
Location: South
Posts: 3,415
It could be wiring as you pointed out. It could also be bad pressure sensor. Have you tested the pressure sensor?
nancygrl is offline   Reply With Quote
Old 06-02-2020, 09:25 AM   #6
TJay74


 
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC
Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
If you give your dealer the code they can put into the GMVIS system and then print out the trouble shooting steps including the pin outs.
__________________
2019 Corvette Z06 2LZ A8 - Halltech CAI, AWE non-catted X-pipe, Mamo V2 ported TB 592rwhp, bone stock 566rwhp

2017 Camaro SS 1LE - Procharger D1SC w/ Tial 2" BOV & Race intercooler / ARH full length catless headers / Alky meth injection system - 650rwhp on conservative tune SOLD
TJay74 is offline   Reply With Quote
 
Post Reply

Tags
a/c, compressor, ecm, error, p0532


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:43 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.