What did you do to your 6th Gen Camaro today?! - Page 45

Hyper16 · 08-07-2016, 05:01 PM

Quote:

Originally Posted by Sev

As requested, photos of the lt1 emblem with more of the Camaro in frame.

Lighting isn't the best, and car is dirty (getting a bath later when its cooler).

Hyper16 · 08-07-2016, 05:13 PM

Quote:

Originally Posted by Sev

As requested, photos of the lt1 emblem with more of the Camaro in frame.

Lighting isn't the best, and car is dirty (getting a bath later when its cooler).

I just checked their website and couldn't find those. The only ones I see are 6 inches long. Camaro emblem is only 2.5 inches. Would you please post a link. Thanks.

jaysonstuart · 08-07-2016, 05:24 PM

Quote:

Originally Posted by CreativeDawn

Just ordered these for a little extra down-force. Very excited and made a request to ship them 2nd day! I'll post pictures when installed guys!

Sev · 08-07-2016, 05:28 PM

Quote:

Originally Posted by Hyper16

I just checked their website and couldn't find those. The only ones I see are 6 inches long. Camaro emblem is only 2.5 inches. Would you please post a link. Thanks.

Unfortunately there is no link

. I contacted Emblempros with the width measurement of the Camaro badge, and they scaled the original down equally to the 2 3/8ths inches width. Roger was great in the process in helping decide what size would work best for the same look as the original. Hope this helps!

Com69 · 08-07-2016, 05:30 PM

Quote:

Originally Posted by CreativeDawn

Just ordered these for a little extra down-force. Very excited and made a request to ship them 2nd day! I'll post pictures when installed guys!

That's a joke, right? Please no.

Com69 · 08-07-2016, 05:42 PM

Those eye lashes threw me for such a loop I forgot to actually write what I did today! Installed yet another camera, 3 total now. This last one went in the little back passenger window. 99.9% of the time I back into a corner spot with drivers side toward the curb, leaves my poor passenger side at the mercy of whatever dickwad decides that the other 435 empty parking spots just aren't good enough and parks right next to me. At least if they ding me, I'll have proof.

Seahawkfrost · 08-07-2016, 06:30 PM

I had my windows tinted. They are 20% carbon.

https://flic.kr/p/KuYznC

DougCBJ · 08-07-2016, 07:16 PM

I put on the blade spoiler, painted my calipers red, and added GM splash guards.

Hyper16 · 08-07-2016, 07:29 PM

Quote:

Originally Posted by Sev

Unfortunately there is no link

. I contacted Emblempros with the width measurement of the Camaro badge, and they scaled the original down equally to the 2 3/8ths inches width. Roger was great in the process in helping decide what size would work best for the same look as the original. Hope this helps!

OK. Thanks for the reply. I'll just ask him to make another set. Good thing we're on opposite ends of he country. No one will know.

trublucamaro · 08-07-2016, 07:42 PM

Quote:

Originally Posted by KILLA BEE

I really really really really love this look,

Did you happen to put the right on the left, and the left on the right? The gap near the front of the stripe looks like it matches the opening at the rear of the door.

Did you have to cut these once applied?

HomeBrewer · 08-07-2016, 08:18 PM

Found a road where I could play with launch control. Had some fun and didn't get a ticket.

Com69 · 08-07-2016, 08:22 PM

Quote:

Originally Posted by trublucamaro

Did you happen to put the right on the left, and the left on the right? The gap near the front of the stripe looks like it matches the opening at the rear of the door.

Did you have to cut these once applied?

+1
I didn't want to be the one to rain on his parade, glad someone else pointed it out though.

trublucamaro · 08-07-2016, 08:43 PM

Quote:

Originally Posted by Com69

+1
I didn't want to be the one to rain on his parade, glad someone else pointed it out though.

not trying to rain on his parade, it looks good, just look completely different than others I've seen, and to me the gap that exists for the door opening looks odd sitting out there not on a body line.

Com69 · 08-07-2016, 09:01 PM

Quote:

Originally Posted by trublucamaro

not trying to rain on his parade, it looks good, just look completely different than others I've seen, and to me the gap that exists for the door opening looks odd sitting out there not on a body line.

Didn't mean to suggest you were. I just hate to bring anyone down when they're that excited, some people are more sensitive than others. Didn't want to have to start handing out forms.

I keep a stack in the office just in case. Always amusing.

08-07-2016, 05:42 PM	#622
Com69 Banned Drives: 2016 Camaro 2SS 6M Nightfall Gray Join Date: May 2016 Location: Western MA Posts: 522	Those eye lashes threw me for such a loop I forgot to actually write what I did today! Installed yet another camera, 3 total now. This last one went in the little back passenger window. 99.9% of the time I back into a corner spot with drivers side toward the curb, leaves my poor passenger side at the mercy of whatever dickwad decides that the other 435 empty parking spots just aren't good enough and parks right next to me. At least if they ding me, I'll have proof. Attached Images

08-07-2016, 06:30 PM	#623
Seahawkfrost Drives: 2018 2SS 6MT Hot Wheels Edition Join Date: Jul 2016 Location: Shelton WA Posts: 72	I had my windows tinted. They are 20% carbon. https://flic.kr/p/KuYznC Last edited by Seahawkfrost; 08-07-2016 at 07:28 PM.

08-07-2016, 07:16 PM	#624
DougCBJ Drives: 2016 Blue 2SS Join Date: Mar 2016 Location: Columbus, Ohio Posts: 612	I put on the blade spoiler, painted my calipers red, and added GM splash guards.

08-07-2016, 08:18 PM	#627
HomeBrewer Drives: 2017 2SS Join Date: Feb 2016 Location: Baltimore, MD Posts: 66	Found a road where I could play with launch control. Had some fun and didn't get a ticket.

User Name		Remember Me?
Password