Finally got my Whipple to the track

Joshinator99 · 09-07-2019, 03:06 PM

Well, with a full weight 2SS, 20” wheels, stock manifolds & primary cats, and the ultra-conservative 3.625” pulley on my Whipple, I wasn’t sure what to expect. But I did get one run in today with a decent 1640 DA and knocked down a 10.87@128! Later in the day I backed it up with a 10.86@127 in a slightly higher DA. The KingLT1-approved 20” drag radials (Nitto 555R) hooked like a charm! So even with only 7 psi of boost, it feels damn good to join the 10-second club. Thanks to all of you for the help along the way, but I feel like this is just the beginning...

Tim M · 09-07-2019, 03:44 PM

Excellent!

sal11585 · 09-07-2019, 05:39 PM

Nice! Suppose to get mine installed next week

arpad_m · 09-07-2019, 05:59 PM

Congratulations, this was an awesome pass

oldman · 09-07-2019, 06:44 PM

sweet, 7 PSI on a stock engine/ stock primary exhaust....

streetyme · 09-07-2019, 06:53 PM

Awesome runs .. 7 #'s and 10's Congrats

Joshinator99 · 09-07-2019, 07:20 PM

Thanks fellas!

KingLT1 · 09-07-2019, 08:18 PM

Nice job!

Drsagacity · 09-07-2019, 09:04 PM

Nicely done!

Jfmoore79 · 09-07-2019, 09:41 PM

Which size 555R did you go with? Stock SS wheel?

KingLT1 · 09-07-2019, 10:19 PM

305/35/20 555r on stock wheels.

Joshinator99 · 09-08-2019, 03:47 AM

Quote:

Originally Posted by KingLT1

305/35/20 555r on stock wheels.

Yep, these worked out great. I aired them down to 20# and gave them a good burnout.

wnta1ss · 09-08-2019, 06:24 AM

Nice! Your sig says that you are running E85? Looks like the car is making decent power.

Jfmoore79 · 09-08-2019, 07:11 AM

Quote:

Originally Posted by KingLT1

305/35/20 555r on stock wheels.

Thanks. I just looked back and found some pics posted of how they look. Glad to see they fill the wheel well and perform like they should. That combo might be the direction I go next

09-07-2019, 03:06 PM	#1
Joshinator99 Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018 Location: Petersham MA Posts: 4,749	Finally got my Whipple to the track Well, with a full weight 2SS, 20” wheels, stock manifolds & primary cats, and the ultra-conservative 3.625” pulley on my Whipple, I wasn’t sure what to expect. But I did get one run in today with a decent 1640 DA and knocked down a 10.87@128! Later in the day I backed it up with a 10.86@127 in a slightly higher DA. The KingLT1-approved 20” drag radials (Nitto 555R) hooked like a charm! So even with only 7 psi of boost, it feels damn good to join the 10-second club. Thanks to all of you for the help along the way, but I feel like this is just the beginning... Attached Images __________________ 2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion *1059 WHP/944 WTQ, 9.48@150*

09-07-2019, 03:44 PM	#2
Tim M Drives: 2018 Camaro SS 1LE Join Date: Jul 2018 Location: Stuttgart, Germany Posts: 807	Excellent! __________________ 2018 SS 1LE German Based Nurburgring Visit #19 Ring Laps: 77

09-07-2019, 05:39 PM	#3
sal11585 Drives: 2017 Camaro SS 2ss Nightfall Gray Join Date: Aug 2018 Location: New york Posts: 149	Nice! Suppose to get mine installed next week __________________ ACS front spoiler, rear spoiler, side skirts and rock guards (gloss black). Real carbon fiber dash insert, real carbon fiber gear bezel, GM dark tail lights, Gm black badges(Emblems and ss) Powder-coated gloss black factory 5 spoke split wheels Roto fab Biggulp CAI Full paint correction with cquartz finest ceramic coating Whipple 2.9 ARH Long tube headers with High flow cats 1le sway bars F&R BMR Upper and lower trailing arms Hurst short throw shifter

09-07-2019, 05:59 PM	#4
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,603 View My Garage	Congratulations, this was an awesome pass __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

09-07-2019, 06:44 PM	#5
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,316	sweet, 7 PSI on a stock engine/ stock primary exhaust.... __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.

09-07-2019, 06:53 PM	#6
streetyme Drives: 2016 2SS nav mag ride npp a8 Join Date: Jul 2013 Location: St Louis Posts: 202	Awesome runs .. 7 #'s and 10's Congrats __________________ 2016 2SS A8 mag ride npp exhaust nav sunroof Rotofab CAI Borla Atak NPP Corsa X pipe BBS CHR Extreme Contactsport 2.9 Whipple Elite catch can Rotofab Juiced Motorsports installed by STG Motorsports JMS Fuel Maxx tuned by Gregs Tuning Operation Weld Laguna 17x10 18x5 2006 mustang gt Magnuson Livernois stage 2 heads stage 2 blower cams dynatech headers 4.10's Circle D convertor 533/511bs) (9.8lbs)

09-07-2019, 07:20 PM	#7
Joshinator99 Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018 Location: Petersham MA Posts: 4,749	Thanks fellas! __________________ 2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion *1059 WHP/944 WTQ, 9.48@150*

09-07-2019, 08:18 PM	#8
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,797	Nice job! __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA

09-07-2019, 09:04 PM	#9
Drsagacity Drives: 2017 Camaro 2SS Nightfall Gray vert Join Date: Jan 2018 Location: Swansea, IL Posts: 1,219	Nicely done! __________________ 2017 Camaro 2SS vert - Nightfall Gray Magnuson Heartbeat SC - Tuned by JRE Racing 776whp/745wtq (12psi) 2018 Corvette Z06 vert- Black To be tuned by JRE Racing TBD performance

09-07-2019, 09:41 PM	#10
Jfmoore79 Drives: 2016 Garnet Red 2SS A8 Join Date: Jul 2017 Location: Bowling Green, Ky Posts: 124	Which size 555R did you go with? Stock SS wheel? __________________ 2016 Camaro 2SS - Auto - MRR 017 - Garnet Red P1X w/ Stage II IC, LT4 Fuel System, JMS Voltage Booster, MMS Catch Can, JRE Off Road Pipes, JRE Tune

09-07-2019, 10:19 PM	#11
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,797	305/35/20 555r on stock wheels. __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA

09-08-2019, 06:24 AM	#13
wnta1ss Drives: 2017 Camaro 1SS Join Date: Aug 2016 Location: NH Posts: 1,692	Nice! Your sig says that you are running E85? Looks like the car is making decent power.

User Name		Remember Me?
Password