[Jsreo]

Originally Posted by 2SS Capt

Damn good price!
On another note, I bought the QJ "extensions" for the 5000SLX (to basically make it a 5000EXT and reach the furthest forward jack point (you guys all had me second guessing myself!)), I haven't used them yet, but I suspect they should work just fine under my 2020 2SS without issue? (I know they add 1.5" of height to the QJ but should have more than enough room from what I calculated)...

I have same set up, it is just long enough to reach the farthest jack points and fits under the car just fine. I am not lowered though

[crab]

Originally Posted by closs2sx

Have you ever owned anything other than bendpak? also how old are your lifts 15-20 years ago they were good not the case now

2 post is probably fine as its bolted still cheaply built but the 4 post is supposed to be moveable on casters but unbolted to the floor its not safe and going up mine moves around a bunch even without a car on it. I have a challenger that does not move around with a car on it going up and have had a rotary (was 12 years old and only sold it because i needed more under lift clearance) and it was rock solid. My mohawk is top of the class

Both bolted down and new when installed, 2 post 2010 and 4 post was maybe 2016.

[closs2sx]

Originally Posted by crab

Both bolted down and new when installed, 2 post 2010 and 4 post was maybe 2016.

yeah bolted down helps but they say its not needed but it is on a bendpak if you want it safe. My challenger is more stable unbolted than the bendpak is bolted.
if you ever buy another lift try rotary 4 post or mohawk 2 post then tell me how it compares to the bendpak there is no comparison

[Ryanbabz71]

+1 for quickjack



They store nicely too

[arctic rs 52]

Originally Posted by closs2sx

yeah bolted down helps but they say its not needed but it is on a bendpak if you want it safe. My challenger is more stable unbolted than the bendpak is bolted.
if you ever buy another lift try rotary 4 post or mohawk 2 post then tell me how it compares to the bendpak there is no comparison

My bendpak 4 post works great! If its good enough for Jay Leno its good enough for me