06-20-2022, 10:56 AM | #1 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
Lingenfelter Big Bore Pump
Placed my order May 9 and they said June 17 delivery. I called them today and they said early August!
Is there an alternative to this pump?
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
06-20-2022, 11:02 AM | #2 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,796
|
No...you will just have to Google vendors and keep calling until you run into a place that has one in stock.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
06-20-2022, 03:01 PM | #3 |
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,252
|
Mine took a few weeks but it arrived when promised.
__________________
Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50
|
06-20-2022, 03:17 PM | #4 |
Drives: 2019 Camaro 2SS Join Date: Aug 2020
Location: McCordsville, Indiana
Posts: 621
|
Where did you order from? I ordered mine in May as well from XDI. Last update was late June/Early July. That was a couple weeks ago…. I haven’t followed up yet to see if we are still on track…
Cars been in the air for three weeks now, not worried as I won’t get my headers back from Jet Hot for another couple weeks (5 weeks total yeash - 2500 coating). My wife says I should really do this stuff in the winter lol. But my garage isn’t insulated/heated and I’d burn through a ton of propane. I hate cold too haha.
__________________
2019 Shock 2SS A10. 2650@10psi/LPE HPFP/XDI+30/LT4 LPFP+JMS/Soler 95mm/Rotofab, E65, CSP 2” Headers/GESI GenII Cats. MM Wild/GM SG3 suspension/1LE Brakes, Velgen VF5 Wheels/GY SC3. JRE Tuned.
|
06-20-2022, 08:32 PM | #5 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
LPE. I think I've found one. BTW, there is no alternative to this pump! How can this be?
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
06-20-2022, 09:31 PM | #6 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,749
|
Well, you can technically do the XDI belt driven pump route. I wouldn’t do it, but it technically is an alternative.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
06-21-2022, 08:44 AM | #7 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,796
|
The XDI belt driven pump isn't a larger pump. It's simply a secondary pump. Yes I agree it's a option but it doesn't sound like a good one at this point.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
06-21-2022, 08:47 AM | #8 | |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Quote:
https://www.ebay.com/itm/32345681658...3ABFBMgsWd6LBg just call to make sure the got it like I did. Alos try Rynne Cunningham since he and LPE are doing a lot builds w them
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
06-21-2022, 10:47 AM | #9 |
Drives: 2017 Camaro SS 50th Anniversary Join Date: Apr 2021
Location: Missouri
Posts: 929
|
Not sure if you already got the injectors, but what about supplemental port inj? Does that work with a PD blower?
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel TooHighPsi Port Injection (installed & tuning) CircleD 3K Stall | QA1 CF Driveshaft Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear Forgestar F14 18x8 NT555G2 235/50/18 Front 10.84@131 w/4.13" pulley ??.??@??? w/3.7" pulley (installed & tuning) |
06-21-2022, 11:02 AM | #10 | ||
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
Quote:
I bought an Eddie because it has PI bosses, but I doubt I'll go there. Quote:
Kong just slipped his delivery date another two weeks.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
||
06-21-2022, 12:36 PM | #11 |
Old badass
Drives: 14GMC 2.9 16GMC Turbos 2020Silv.6.2 Join Date: Mar 2020
Location: Arlington Tx
Posts: 238
|
Looking forward to results. Should be a great combo.
__________________
I've had 7 Camaro's. All gone...for now.
Current build in progress 2016 GMC4x4 RCSB twin hair dryers ~1k whp fbe port inj 1/8 mi & stealth street terror |
06-21-2022, 04:15 PM | #12 |
Drives: 2019 Camaro 2SS Join Date: Aug 2020
Location: McCordsville, Indiana
Posts: 621
|
I just ordered one from JRE, they had them in stock. XDI is shipping the +30 injectors asap now that I cancelled the LPE pump, but I get hit with the transaction fee return which is fine. It’s not their fault but cost me a little. Estimating August, ordered them May 10th.
However they are shipping my injectors out ASAP, they are at Lingenfelters lead time for the pumps. +1 or like 10 for JRE!
__________________
2019 Shock 2SS A10. 2650@10psi/LPE HPFP/XDI+30/LT4 LPFP+JMS/Soler 95mm/Rotofab, E65, CSP 2” Headers/GESI GenII Cats. MM Wild/GM SG3 suspension/1LE Brakes, Velgen VF5 Wheels/GY SC3. JRE Tuned.
|
06-21-2022, 04:33 PM | #13 | |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
Quote:
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
06-21-2022, 06:08 PM | #14 |
Drives: 2019 Camaro 2SS Join Date: Aug 2020
Location: McCordsville, Indiana
Posts: 621
|
I ordered a 2650 back in late May. Got it like a week after from JRE. I can’t say enough good things about them. 👍
__________________
2019 Shock 2SS A10. 2650@10psi/LPE HPFP/XDI+30/LT4 LPFP+JMS/Soler 95mm/Rotofab, E65, CSP 2” Headers/GESI GenII Cats. MM Wild/GM SG3 suspension/1LE Brakes, Velgen VF5 Wheels/GY SC3. JRE Tuned.
|
|
|
Post Reply
|
|
|