Sparks 2014 - 2015 SS emblem on a 2010 - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

George-CZ · 02-28-2022, 05:22 AM

So the last hope was extinguished.

Instead of a bow tie, I wanted the inscription CAMARO (with larger spacing), but the holes are too large to hide under the individual letters

Name: Newrear__2_.JPG
Views: 214
Size: 40.4 KB

0stones0 · 02-28-2022, 05:27 AM

You could do the option of the blackout of that area and then put the letters on that. Just a thought.

George-CZ · 02-28-2022, 11:28 AM

Quote:

Originally Posted by 0stones0

You could do the option of the blackout of that area and then put the letters on that. Just a thought.

Nice... I didn't think of that

I'll think about it.
Thank nou Stones

0stones0 · 02-28-2022, 04:22 PM

Quote:

Originally Posted by George-CZ

Nice... I didn't think of that

I'll think about it.
Thank nou Stones

No problem George!

1JEWLDSSRS · 02-28-2022, 05:34 PM

And I have a set of those "Camaro" letters I had on mine for a bit, if anyone wants them! Mirrored stainless from ACC... Free!!!! lol. All you have to do is clean them up with a little polish, put some sticky tape on the back, and stickem..

MSgt O · 02-28-2022, 06:15 PM

Wayne, is there anything you havent tried yet????

0stones0 · 04-01-2022, 03:02 PM

Had a chance to install the emblem today. Temps aren’t optimal but, seems to be bonded quite well. Think it came out nice!

acutron42 · 04-01-2022, 03:28 PM

Looks awesome!

Royal Tiger · 04-01-2022, 03:53 PM

Sweet!!!!!

witenite · 04-01-2022, 09:58 PM

Nice!

joekono · 04-01-2022, 11:27 PM

Nice job!! Congrats!!!

1JEWLDSSRS · 04-02-2022, 08:00 AM

Quote:

Originally Posted by MSgt O

Wayne, is there anything you havent tried yet????

lol, I just saw this!! To answer your question,,, Nope, I think I have tried just about everything mod wise at some point in time in the11 years I have had my Camaro!! Spent a lot of money, but every cent was well worth it in my opinion.. Just so I would have a special, and unique Camaro that nobody else has. I have seen a couple around here that have tried in some way, shape or form to "copy" mine, but they just don't come any where near! According to my friends. They look good, just not amazing. Thanks sir!!

0stones0 · 04-03-2022, 05:44 PM

A comparison from bowtie to Sparks emblem. Works nice with RA plate.

Moto-Mojo · 04-03-2022, 05:54 PM

Man, I (used) to love these kind of mods and them got bit by the OE bug. (I get it’s gone) Even though I have strayed with other things. It does look incredibly good though. Bravo!

02-28-2022, 05:22 AM	#15
George-CZ Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018 Location: Czech Republic Posts: 1,592	So the last hope was extinguished. Instead of a bow tie, I wanted the inscription CAMARO (with larger spacing), but the holes are too large to hide under the individual letters __________________ My life is a constant struggle with Camaro. K&N CAI, Stainless Power longtubes, high flow cats, modified Ragazzon High Performance axle back, Soler Performance ported throttle body, Soler Performance throttle controller, RAM clutch adjuster, modified LS7 clutch kit, Tick Performance billet bearing support, Tick Performance remote bleeder, separate clutch reservoir, BMR trailing arms, BMR toe rods, Pedders Suspension cradle bushing inserts, Control Arm Bushings, Strut tower brace, oil catch can, Hurst T-handle shifter, 20mm wheel spacers, DBA brakes, QTP Cutouts, Dynosteve tune.

02-28-2022, 05:27 AM	#16
0stones0 It don’t come easy. Drives: 2010 2SS RS M6 Join Date: May 2014 Location: WI Posts: 2,220 View My Garage	You could do the option of the blackout of that area and then put the letters on that. Just a thought. Attached Images __________________

02-28-2022, 05:34 PM	#19
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,472	And I have a set of those "Camaro" letters I had on mine for a bit, if anyone wants them! Mirrored stainless from ACC... Free!!!! lol. All you have to do is clean them up with a little polish, put some sticky tape on the back, and stickem.. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

04-01-2022, 03:02 PM	#21
0stones0 It don’t come easy. Drives: 2010 2SS RS M6 Join Date: May 2014 Location: WI Posts: 2,220 View My Garage	Had a chance to install the emblem today. Temps aren’t optimal but, seems to be bonded quite well. Think it came out nice! Attached Images __________________

04-01-2022, 09:58 PM	#24
witenite Drives: 2010 2SS non RS Join Date: May 2014 Location: Virginia Posts: 3,253 View My Garage	Nice! __________________

02-28-2022, 06:15 PM	#20
MSgt O Drives: 2012 Camaro 2SS/RS Vert LS3/M6 Join Date: Aug 2021 Location: Cheboygan, Michigan Posts: 660	Wayne, is there anything you havent tried yet????

04-01-2022, 03:28 PM	#22
acutron42 Drives: 2013 Camaro 2SS AGM Join Date: Apr 2020 Location: WNY Posts: 735	Looks awesome!

04-01-2022, 03:53 PM	#23
Royal Tiger Account Suspended Drives: 2013 2SS/RS Convertible Join Date: Apr 2016 Location: Lehigh Valley, PA Posts: 3,873	Sweet!!!!!

04-01-2022, 11:27 PM	#25
joekono Drives: Camaro Convertible 2014 1LT Join Date: May 2019 Location: New Jersey Posts: 1,013 View My Garage	Nice job!! Congrats!!! __________________

04-03-2022, 05:44 PM	#27
0stones0 It don’t come easy. Drives: 2010 2SS RS M6 Join Date: May 2014 Location: WI Posts: 2,220 View My Garage	A comparison from bowtie to Sparks emblem. Works nice with RA plate. Attached Images __________________

04-03-2022, 05:54 PM	#28
Moto-Mojo Fast Cars and Old Guitars Drives: 2015 2SS RS (L99, baby!) Join Date: Apr 2012 Location: N. CA Posts: 3,975	Man, I (used) to love these kind of mods and them got bit by the OE bug. (I get it’s gone) Even though I have strayed with other things. It does look incredibly good though. Bravo! __________________ “I don’t want to belong to any club that would have me as a member.” - Groucho Marx