02-05-2020, 08:25 PM | #1 |
Drives: 94 impala ss 396 6spd Join Date: Dec 2011
Location: melbourne fl
Posts: 84
|
1st Dyno tune
Hello
I just had the supercharger replacement done under warranty (13 ZL1 w/ 40000 miles) then I added I. D. 1050x injecters and a SW tuning e85 kit. Took It to get dyno tuned today, I was hoping for more hp, it started at (car already had Cai, bigger tb, full length headers and 3 inch cat back) 505 then to 522 I think. Then added about 12 gallons of e85 to about 4 gallons premium already in the tank. It worked its way up 554 hp and we stopped. I plan now to add a bap and smaller supercharger pulley, most likely a 2.44. I am planning on going to the Cadillac track attack on Feb 22 and getting those items and having it Dyno tuned again and then I will stop with adding hp for awhile. Here are the Dyno sheets, both are same final pull just one sae and the other standard.
__________________
dave
13 ZL1 12w7 plus a few other things |
02-05-2020, 08:49 PM | #2 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
Do the lower pulley before the upper.
|
02-06-2020, 12:18 AM | #3 |
Drives: 2012 ZL1 Ashen Grey Join Date: Apr 2017
Location: NW Indiana
Posts: 378
|
is that your car in the pic? Looks like a 6th gen front end.....
__________________
2012 M6
Kooks 1 7/8, off road pipes , full corsa exhaust ID1300s/ 22% lower / 2.5 upper, JLT CAI, DSX flex fuel, DSX AUX fuel pump. S19 cam Tuned and built by Speed Inc 635/632-93 octane 725/738-E85 |
02-06-2020, 11:04 AM | #4 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
100% correct.
ATI super damper, with a 10%. You will need more than a BAP to support 20% overdrive pulley combo. Monitor fuel pressure, Stock pump with BAP runs out at 700 RWHP on Gasoline and the more E you put in the lower that number goes. With E-40 I would expect you to run out of fuel pump at 595 RWHP, which you can easily do with a 10% pulley. Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
02-06-2020, 06:13 PM | #5 |
Drives: 94 impala ss 396 6spd Join Date: Dec 2011
Location: melbourne fl
Posts: 84
|
Thanks for the info on the different pulleys. I will definitely look into more before I do anything. The thinking behind the supercharger pulley is it may have the old style isolater and will need to be replaced. I figured that would be the easiest to do.
My car is a 5th Gen with a 6th Gen bumper cover.
__________________
dave
13 ZL1 12w7 plus a few other things |
02-07-2020, 07:05 AM | #6 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Quote:
And don't void the supercharger 10 year 100K warranty by changing the upper pulley and or isolator. Run it until it is noisy then have the whole supercharger replaced
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
02-07-2020, 10:50 PM | #7 |
Drives: 2012 ZL1 Ashen Grey Join Date: Apr 2017
Location: NW Indiana
Posts: 378
|
Sorry off subject but can i see a pic of your car with that bumper
__________________
2012 M6
Kooks 1 7/8, off road pipes , full corsa exhaust ID1300s/ 22% lower / 2.5 upper, JLT CAI, DSX flex fuel, DSX AUX fuel pump. S19 cam Tuned and built by Speed Inc 635/632-93 octane 725/738-E85 |
02-09-2020, 08:58 PM | #8 | |
Drives: 2013 ZL1 Join Date: May 2019
Location: Texas
Posts: 111
|
Quote:
|
|
02-10-2020, 06:49 AM | #9 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Quote:
Even on straight gasoline you would not have enough fuel pump with a JMS BAP. You will need a Fore innovations return twin pump fuel system and ID1300x injectors. Give us a call we will spec everything out for you and get you what you need. Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
02-10-2020, 08:07 AM | #10 |
Drives: 2013 ZL1 and 2019 Ram Laramie Join Date: May 2017
Location: Milwaukee
Posts: 1,259
|
|
02-10-2020, 08:42 AM | #11 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Experience, fuel delivery, customer service.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
02-10-2020, 06:18 PM | #12 |
Drives: ZL1 Join Date: Oct 2012
Location: Talladega
Posts: 631
|
|
02-10-2020, 09:49 PM | #13 |
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,281
|
I think it's probably the Ikon front bumper conversion. There's a guy on youtube that has a nice example of a ZL1 that has been given the 6th gen treatment: "Outlaw Performance Garage". Here's a pic of his car
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp
Past Rides- 2014 ZL1 M6 Red Hot | Tons of mods 2004 CTS-V M6 Silver | Many mods 1995 Corvette M6 Torch Red | A few more mods 1992 Camaro M5 White | A few mods |
|
|
|
|