03-09-2020, 10:48 PM | #1 |
Drives: 1LE Join Date: Sep 2017
Location: East Coast
Posts: 1,468
|
So you think your fast at your local track?
Watch this guy! Too many people overanalyze their setup when they're not even near the limits. Now on the other hand this guy's a different story.
https://youtu.be/Mc58KcjHNX0 |
03-09-2020, 11:37 PM | #2 |
Drives: '19 RivrsdBlu 1LE ('17 1LE HB sold) Join Date: Nov 2016
Location: Seattle
Posts: 1,686
|
Wow, it's the fastest C7 Corvette I've seen so far and amazing driving too (serious size of man berries) .. that said, being a race car that can rev up to 7,500 RPM, someone overanalyze the sh.t out of the setup on that car for sure
__________________
|
03-10-2020, 12:17 AM | #3 |
Drives: 2017 SS 1LE, 2016 1SS (previous) Join Date: Apr 2016
Location: Metro-Detroit
Posts: 1,863
|
He’s quite the driver. He made GM look dumb by beating the Camaro GT4.R (Aschenbach at the wheel) at it’s debut at St. Pete. Aquilante drove a GTS-spec Boss 302S.
Him and Phoenix did race a 6th gen Camaro SS briefly in TA4 and T1. The car had a stock engine, trans and diff. Just stripped, caged, coil overs and race brakes. SS 1LE aero. https://youtu.be/kPg4bJwi9Oc |
03-10-2020, 12:51 AM | #4 | |
Drives: '19 RivrsdBlu 1LE ('17 1LE HB sold) Join Date: Nov 2016
Location: Seattle
Posts: 1,686
|
Quote:
__________________
|
|
03-10-2020, 01:17 AM | #5 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Holy crap!!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
03-10-2020, 11:25 AM | #6 |
Drives: 2016 2SS BLK A8 Vert Join Date: Dec 2017
Location: MA
Posts: 1,029
|
You can say that again! He's a fantastic driver driving the hell out of the line
__________________
NPP, MRC, Tinted side & rear reflectors, OEM ZL1 Rockers / 3rd Brake / Darken tail lights, OEM Blk rear splash guards, Satin hood wrap, Fuse pull, Sound tube delete, Cat delete, Ported 95 TB, Ported MSD IM, Dry RotoFab, ARH 1 7/8 headers, E85, "Performance Dyno" Tune, BMR "pieces", "Track" alignment, Hawk DCT-70/70's w/SRF, Goodridge lines, Ti shims, Red powdered calipers, 18" APEX SM-10's w/ Pirelli DH's, FE4 Vert swaybars, Brake cooling ducts, ATI 10% UD, Vorshlag camber plates, OEM 1LE Splitter w/APR Ext., Velossa BIG MOUTH Ram Air, CF QA1, ZLE brakes(F)
|
03-10-2020, 11:48 AM | #7 |
Drives: 2020 SS 1LE (previous: 2017 SS 1LE) Join Date: Mar 2012
Location: Canada, eh!
Posts: 5,091
|
That's what "smooth" driving is supposed to look like
Ya he is a great driver. And ya Nicky Bobby, i agree with ya completely! |
03-10-2020, 12:11 PM | #8 | |
Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,319
|
He ran away with GT2 at the SCCA runoffs this year. FYI - he ran A7's on one side of the car and R7's on the other for the race.
|
|
03-10-2020, 02:19 PM | #9 |
Drives: 1LE Join Date: Sep 2017
Location: East Coast
Posts: 1,468
|
|
03-10-2020, 02:28 PM | #10 |
Drives: '19 RivrsdBlu 1LE ('17 1LE HB sold) Join Date: Nov 2016
Location: Seattle
Posts: 1,686
|
Of course! He's probably one of the fastest drivers I've seen. My point is putting tons of effort, thought process to a setup and being hell of a driver are not mutually exclusive, in fact they're mutually beneficial . I think we all agree with "tighten the nut behind the wheel" it's by default of course, almost a cliché on all the online car discussion forums
__________________
|
03-10-2020, 02:34 PM | #11 | |
Drives: 2017 Hot Red 2ss Auto adrenaline Join Date: Aug 2017
Location: Detroit
Posts: 97
|
Quote:
|
|
03-10-2020, 02:45 PM | #12 | |
Drives: 2017 Hot Red 2ss Auto adrenaline Join Date: Aug 2017
Location: Detroit
Posts: 97
|
Quote:
|
|
|
|
Post Reply
|
|
|