You are browsing camaro6 
09-18-2022, 12:33 PM
|
#1 |
|
Account Suspended
Drives: 21 ZL1 Join Date: Feb 2022
Location: South East
Posts: 662
|
QQ ZL1 2650 install - NGK 6510 Plugs what gap???
Whats the gap you all use for doing the 6510s with a maggie 2650 install for ZL1 running 93??
.035. Thats what i have been able to gather is a nice in between from what I could scrape from older posts from all over the internet. Anyone know? |
|
|
|
09-18-2022, 12:59 PM
|
#2 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I think .035 is too much, I'd say about .030. We ran .026 on race fuel. I'm not sure what GM gaps theirs at stock.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 |
|
|
|
|
09-18-2022, 01:17 PM
|
#3 | |
         
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,556
|
Quote:
See https://www.camaro6.com/forums/showthread.php?t=601681 Actually, that's not the biggest thread but I don't see it
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. Last edited by JSH; 09-18-2022 at 05:35 PM. |
|
|
|
|
09-18-2022, 01:56 PM
|
#4 |
|
Former GM Technician
Drives: 2018 ZL1 A10, 06 Silverado Duramax Join Date: Sep 2009
Location: Switzerland
Posts: 341
|
0.035 is what I gapped mine.
More in this thread https://www.camaro6.com/forums/showthread.php?t=609179
__________________
2018 Camaro ZL1 A10
Rotofab Big Gulp, Nick Williams 103, Magnuson 2650, 9.17" (14%) lower, 90mm upper, Vengeance Racing Heads (LME) Cam Package (Cammotion Stage 1), Johnson Lifters, JMS Voltage Booster, Lingenfelter high flow check valve, BBK shorty headers, Custom 2.75" down pipes, Gesi Gen2 high flow cats, MM catch can 791whp, 772ft-lbs SAE Just added 30% XDI Injectors, LPE big bore hpfp, Flex fuel. Elite tuning, results coming soon. 2006 Silverado Duramax Diesel MPI Compound Turbo 40% over Injectors Efi Live DSP5 Tuning Follow me on Instagram: Swisstyphoon1980 |
|
|
|
|
09-18-2022, 05:26 PM
|
#5 | |
 
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,741
|
Quote:
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
|
|
|
|
|
09-18-2022, 06:30 PM
|
#6 | |
|
Account Suspended
Drives: 21 ZL1 Join Date: Feb 2022
Location: South East
Posts: 662
|
Quote:
|
|
|
|
|
|
09-18-2022, 07:20 PM
|
#7 | |
Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,534
|
Quote:
Hit 16-18 and I would decrease it down to .28
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
