Oil Filter - Page 2

Hell Raiser · 01-03-2020, 10:34 AM

I am going to give it a try and see how it does. It a toss up from what I read in today's post.

Scottyz · 01-03-2020, 10:37 AM

My car got one of the UPF64R on it last oil change.

closs2sx · 01-03-2020, 10:42 AM

been using it in my z06 since the first oil change in 2015 and since the first oil change in my zl1 1le in 2018

TLSTWIN · 01-03-2020, 10:58 AM

Quote:

Originally Posted by Zigg L1

Anyone using the mobil1 oil filter instead of the ac delco?

I am it's all I use on all my vehicles. Same filter as my impala LTZ M1-113(A)

Whocares05050 · 01-03-2020, 11:01 AM

I only use mobil 1 oil filter

warren3537 · 01-03-2020, 12:49 PM

I have noticed that the Mobil-1 M1-113A is slightly longer than the PF64 and a little heavier, but anywhos, I will stick with the M1-113A.

Stephen12ZL1 · 01-03-2020, 01:00 PM

As my service advisor told me prior to the oil pump warranty replacement, "we were glad to see no tune revisions and a PF-64 oil filter in place".

19ZL1/1LE · 01-03-2020, 01:46 PM

The UPF64R has a higher by-pass valve pressure than the PF64. I believe it is 35PSI vs 22PSI. Fram just came out with thier version of it p/n XG12060.

SJFGTO · 01-03-2020, 02:32 PM

Quote:

Originally Posted by Stephen12ZL1

As my service advisor told me prior to the oil pump warranty replacement, "we were glad to see no tune revisions and a PF-64 oil filter in place".

Words to the wise!!!

LT4Greg · 01-05-2020, 09:07 AM

I bought a Napa Gold oil filter yesterday #100290 that I am going to use next oil change for my ZL1. It has a small bypass in the bottom of the filter and I read it’s designed to use with synthetic oils.

Firecaptain · 01-05-2020, 11:51 AM

Apples & oranges.......metric and SAE in those specs

Quote:

Originally Posted by GA1LE

I haven't independently confirmed this, but here are specs listed for each on Rock Auto.
The UltraGuard can flow up to 3 gallons more per minute than the regular and has a higher bust pressure.

https://www.rockauto.com/en/moreinfo...7oqnJvCg%3D%3D

https://www.rockauto.com/en/moreinfo...7oqnJvCg%3D%3D

thescreensavers · 01-05-2020, 01:27 PM

Quote:

Originally Posted by LT4Greg

I bought a Napa Gold oil filter yesterday #100290 that I am going to use next oil change for my ZL1. It has a small bypass in the bottom of the filter and I read it’s designed to use with synthetic oils.

Quote:

Originally Posted by Techdude99

I confirmed GA1LE. The R has the newest filtering media.

I may pick one up and do a Blackstone oil analysis after the engine has a few more HPDE miles to see if there's anything significant between filter changes.

dont forget to do a particle analysis, that will tell you how the filter is doing.

GA1LE · 01-05-2020, 05:49 PM

Quote:

Originally Posted by Firecaptain

Apples & oranges.......metric and SAE in those specs

Not really sure what you’re implying; if you remember unit conversions from school or know how to use www.google.com, it’s apples to apples.

GA SS · 01-06-2020, 08:21 AM

Quote:

Originally Posted by Stephen12ZL1

As my service advisor told me prior to the oil pump warranty replacement, "we were glad to see no tune revisions and a PF-64 oil filter in place".

In my case, the dealer I used for my two free oil changes used the UPF64R and claimed that change came from GM. I have the same concern with the oil pump that many of us do with early built 2017 models. I would think that if my oil pump fails the dealer that used those filters should cover the warranty.
After reading your statement I am torn between the filter to use on my next oil change.

01-03-2020, 10:42 AM	#17
closs2sx Drives: 1970 chevelle Join Date: Aug 2011 Location: Central NH Posts: 1,427	been using it in my z06 since the first oil change in 2015 and since the first oil change in my zl1 1le in 2018 __________________ On Order 2018 ZL1 1LE Garnet Red Tint Coat Metallic MY Car 2015 Z06 Z07 Daytona Sunrise Orange Metallic Dads Car 2013 ZL1 vin 963 Crystal Red Tint Coat/Black Wheels Exposed Carbon Fiber Insert 6 Spd Manual

01-03-2020, 01:00 PM	#21
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,808	As my service advisor told me prior to the oil pump warranty replacement, "we were glad to see no tune revisions and a PF-64 oil filter in place". __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

01-05-2020, 09:07 AM	#24
LT4Greg Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016 Location: Georgia Posts: 5,813	I bought a Napa Gold oil filter yesterday #100290 that I am going to use next oil change for my ZL1. It has a small bypass in the bottom of the filter and I read it’s designed to use with synthetic oils. __________________ ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.

01-03-2020, 10:34 AM	#15
Hell Raiser To fast is not enough Drives: 2019 ZL1 Camaro & 2020 CT5-V Turbo Join Date: May 2019 Location: NC Posts: 85	I am going to give it a try and see how it does. It a toss up from what I read in today's post.

01-03-2020, 10:37 AM	#16
Scottyz 2019 ZL1 1LE MY GOON Drives: 1980 Z28 Big Red. Join Date: Dec 2018 Location: Stoney Creek Posts: 2,061	My car got one of the UPF64R on it last oil change.

01-03-2020, 11:01 AM	#19
Whocares05050 Drives: 2018 Camaro SS 1LE Join Date: Oct 2018 Location: Treasure Coast, FL Posts: 384	I only use mobil 1 oil filter

01-03-2020, 12:49 PM	#20
warren3537 Drives: 2019 Red Hot ZL1 1LE: 2012 RAM 2500 Join Date: Mar 2012 Location: DeRidder, LA Posts: 711	I have noticed that the Mobil-1 M1-113A is slightly longer than the PF64 and a little heavier, but anywhos, I will stick with the M1-113A.

01-03-2020, 01:46 PM	#22
19ZL1/1LE Drives: 19 Camaro ZL1/1LE. 69 Camaro SS/RS Join Date: Jul 2019 Location: Lugoff, SC Posts: 17	The UPF64R has a higher by-pass valve pressure than the PF64. I believe it is 35PSI vs 22PSI. Fram just came out with thier version of it p/n XG12060.

User Name		Remember Me?
Password