License Plate Lights Fuse?? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BigBOSS · 10-22-2010, 10:20 PM

So about a week about I received and installed my LED License Plate Lights from AACStyle and fell in LOVE with them! Well, 2 days ago I noticed my license plate lights were not coming on so I thought maybe the resistors blew on the new LED Lights so I put the stock bulbs back in. Still no juice.. Anyone have ANY idea what fuse may have blown? I cannot find any fuse in the service manual that may have to do with the license plate lights.

Thanks!

BigBOSS · 10-23-2010, 10:18 AM

Someone must know!

Cam 427 · 10-23-2010, 11:23 PM

Check F25D and F29D in the instrument panel fuse box. One of these is the fuse for your license plate light (probably F29D) the other feeds the back up lamps. These two feed into to the body control module. If the fuses are good, then it could be the BCM or the circuit from the BCM to you lights. The connector on the BCM for the circuit is X4 and the pin is 13. Check the ground also.
Page 4-67 in the service manual.

BigBOSS · 10-24-2010, 12:18 PM

Checked all 3 fuses and they're fine. As far as checking the other stuff you listed, I am clueless as what and where to check.

10-22-2010, 10:20 PM	#1
BigBOSS Drives: 2010 Camaro 1LT/RS, 6M, IBM Join Date: Jul 2009 Location: Austin, TX Posts: 480	License Plate Lights Fuse?? So about a week about I received and installed my LED License Plate Lights from AACStyle and fell in LOVE with them! Well, 2 days ago I noticed my license plate lights were not coming on so I thought maybe the resistors blew on the new LED Lights so I put the stock bulbs back in. Still no juice.. Anyone have ANY idea what fuse may have blown? I cannot find any fuse in the service manual that may have to do with the license plate lights. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nows the time boys - pick your personalized vanity plates	NOODLESgoneWILD	General Automotive + Other Cars Discussion	2342	12-13-2018 10:10 PM
LED License Plate Lights	lp454	Exterior Parts & Accessories	5	06-03-2010 08:46 AM
License Plate Solutions Thread.	nickruta	Cosmetics and Lighting Modification Discussions	13	08-27-2009 12:05 PM
Front License plate without drilling holes	faninc	Cosmetics and Lighting Modification Discussions	12	07-30-2009 06:55 PM
Wisconsin Front license plate	erbrooks	USA - Great Lakes	5	06-19-2009 11:00 PM

10-23-2010, 10:18 AM	#2
BigBOSS Drives: 2010 Camaro 1LT/RS, 6M, IBM Join Date: Jul 2009 Location: Austin, TX Posts: 480	Someone must know!

10-23-2010, 11:23 PM	#3
Cam 427 Drives: 2010 2SS Join Date: Apr 2010 Location: Washington Posts: 677	Check F25D and F29D in the instrument panel fuse box. One of these is the fuse for your license plate light (probably F29D) the other feeds the back up lamps. These two feed into to the body control module. If the fuses are good, then it could be the BCM or the circuit from the BCM to you lights. The connector on the BCM for the circuit is X4 and the pin is 13. Check the ground also. Page 4-67 in the service manual.

10-24-2010, 12:18 PM	#4
BigBOSS Drives: 2010 Camaro 1LT/RS, 6M, IBM Join Date: Jul 2009 Location: Austin, TX Posts: 480	Checked all 3 fuses and they're fine. As far as checking the other stuff you listed, I am clueless as what and where to check.