09-08-2020, 12:45 AM | #15 |
Drives: 2020 SS 1LE Join Date: Aug 2020
Location: NorCal
Posts: 636
|
|
09-14-2020, 06:37 PM | #16 |
Drives: 2020 Camaro SS 1LE Join Date: Aug 2020
Location: Bay Area, CA
Posts: 30
|
just found your thread. car looks good i track my car so im concerned about rubbing. im going to negative camber the car anyway before track day anyway but if its rubbing during normal driving around town then i may go a different route.
|
09-14-2020, 11:49 PM | #17 |
I do have spacers 5mm front and 15mm rear. So only with really hard bumps or going fast with a hard drop etc i run and it’s slight. They ride great although i wish the front was about 1/2” lower and the stance would be perfect
|
|
09-15-2020, 12:03 AM | #18 | |
Drives: 2020 SS 1LE Join Date: Aug 2020
Location: NorCal
Posts: 636
|
Quote:
Btw, did you remove your front splitter? |
|
09-17-2020, 11:52 PM | #19 | |
Quote:
Thank you. It doesn’t show it in the pics but i do feel like the rear has settled another 1/4” so that’s why i think the front needs a little more. But pictures hide the flaws well. As far as the front splitter. Funny story, when i bought the car, the front splitter was black, when i drove to check it out i realized the place painted it red. I didn’t like it so i painted it black for now until i find out if i wanna dona zl1/1le front bumper or just get a nicer front lip. But long story short, no, it’s there just red. Here’s an updated pic of my car with rocker panels and updated wicker bill spoiler |
||
03-25-2021, 07:57 AM | #20 |
Drives: 2021 Camaro 2SS Join Date: Mar 2021
Location: New York
Posts: 5
|
I lowered my 2021 2SS with MRC on H&R's as well. They have been on for about a week. I see a difference but not as low as yours yet. I think it will continue to lower the more I drive it. From what I read it should be lower that BMR and Eibach.
Last edited by wildcherry2; 03-25-2021 at 09:01 AM. |
03-25-2021, 01:33 PM | #21 |
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,283
|
Looks good. How is handling in regards to understeer? More rear drop you loose rake and get more understeer. In general.
|
03-26-2021, 08:58 AM | #22 |
Drives: 2021 Camaro 2SS Join Date: Mar 2021
Location: New York
Posts: 5
|
Honestly it feels even better. When taking turns fast the car is much more precise and lays very flat. In future I will get the DSC controller
Last edited by wildcherry2; 03-26-2021 at 09:14 AM. |
03-26-2021, 10:07 AM | #23 |
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,283
|
|
07-19-2021, 07:39 AM | #24 |
Drives: 2018 camaro 2SS Join Date: Jan 2020
Location: Baton Rouge,LA
Posts: 52
|
i wonder if these springs work with MRC
__________________
2018 2ss A8-Forged Internals, heads/cam, fuel system, Edelbrock 2650
|
07-19-2021, 07:54 AM | #25 |
Drives: 2018 camaro 2SS Join Date: Jan 2020
Location: Baton Rouge,LA
Posts: 52
|
i have a non 1le, this says for ss but i also have mag ride. anybody know if these springs work with mag ride?
__________________
2018 2ss A8-Forged Internals, heads/cam, fuel system, Edelbrock 2650
|
01-30-2022, 10:50 PM | #26 |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
I went ahead and installed some H&R springs on my 1SS, I’ll post some pics tomorrow
|
01-31-2022, 03:52 PM | #27 |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
I made a quick decision the oter night and went with H&R springs front and rear. Overall the stance looks really good to me, they've been on a week and so far I like how they look. I haven't decided yet on the performance side, I can tell the struts weren't made for this ride height.... sometimes under the right load it'll do pogo stick slightly, or rebound harshly and not settle off the first unload of the suspension. It'll take two bounces to settle on the right situation. For me, I want the performance to be better, not just looks. more than likely going to GM lowering kit soon. |
02-01-2022, 05:11 PM | #28 |
Drives: 2024 Black ZL1, M6 Join Date: Mar 2014
Location: Murrieta, CA
Posts: 322
|
Quote:
__________________
|
|
|
Post Reply
|
Thread Tools | |
|
|