Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


AWE Tuning


Post Reply
 
Thread Tools
Old 11-24-2018, 11:22 AM   #1
Jfmoore79
 
Jfmoore79's Avatar
 
Drives: 2016 Garnet Red 2SS A8
Join Date: Jul 2017
Location: Bowling Green, Ky
Posts: 124
Pulled the trigger...finally!

I finally pulled the trigger on a P1X set up from JRE today and couldn’t be happier with my experience. Spoke to Al this morning and he was incredibly nice and helpful in answering my questions. Ted had worked on multiple quotes for me as I continued to change my mind on which direction to go. It’s been said many times but the entire Jannetty crew goes above and beyond. Also, I want to thank EyeFixStuff for his recommendations as my set up will be very similar. Here’s what I ended up with so far:

P1X, black, 9-10 lb pulley
Stage II intercooler
LT4 Fuel system
Voltage Booster
Off road mid pipes
AEM wide band
AEM OBD II gauge
LS3 Front crank seal
JRE Tune

I’m excited for a winter install!
Jfmoore79 is offline   Reply With Quote
Old 11-24-2018, 03:45 PM   #2
Eyefixstuff
 
Eyefixstuff's Avatar
 
Drives: 16’ 2SS A8 HBM Procharged
Join Date: Jun 2017
Location: Boston
Posts: 410
Quote:
Originally Posted by Jfmoore79 View Post
I finally pulled the trigger on a P1X set up from JRE today and couldn’t be happier with my experience. Spoke to Al this morning and he was incredibly nice and helpful in answering my questions. Ted had worked on multiple quotes for me as I continued to change my mind on which direction to go. It’s been said many times but the entire Jannetty crew goes above and beyond. Also, I want to thank EyeFixStuff for his recommendations as my set up will be very similar. Here’s what I ended up with so far:

P1X, black, 9-10 lb pulley
Stage II intercooler
LT4 Fuel system
Voltage Booster
Off road mid pipes
AEM wide band
AEM OBD II gauge
LS3 Front crank seal
JRE Tune

I’m excited for a winter install!
Excellent!! Glad to have helped! Ted will get you dialed in with this setup quickly. You’re going to love it. Be sure to post the results and your experience with it.

Edit: not sure if you have a catch can or not, I use the Elite e2x but there are other options as well. If you use a setup for boosted applications it will help with the pressure on the seals.
__________________
16' 2SS A8 Hyperblue | P1SC-1, Race IC | JMS fuel pump voltage booster | Jannetty custom tune | Elite E2-X catch can | M017 Wheels
Eyefixstuff is offline   Reply With Quote
Old 11-24-2018, 04:46 PM   #3
Jfmoore79
 
Jfmoore79's Avatar
 
Drives: 2016 Garnet Red 2SS A8
Join Date: Jul 2017
Location: Bowling Green, Ky
Posts: 124
Yes, I plan on a catch can but haven’t decided which one yet. Debating on Elite vs Mighty Mouse
Jfmoore79 is offline   Reply With Quote
Old 11-24-2018, 05:29 PM   #4
TJay74


 
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC
Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
Quote:
Originally Posted by Eyefixstuff View Post
Excellent!! Glad to have helped! Ted will get you dialed in with this setup quickly. You’re going to love it. Be sure to post the results and your experience with it.

Edit: not sure if you have a catch can or not, I use the Elite e2x but there are other options as well. If you use a setup for boosted applications it will help with the pressure on the seals.
I have a PC D1SC on my 17 SS 1LE, there really isnt a way to plumb a CC into the system easily once you put a SC on it. The PC kit uses a manifold tapped into the fitting that goes from the throttle body to the intake manifold cover.

I had to pull my Mishimoto CC and have yet to find anything that will plumb into the setup easily. I have all 4 of the ports on the manifold that PC sends used right now.
__________________
2019 Corvette Z06 2LZ A8 - Halltech CAI, AWE non-catted X-pipe, Mamo V2 ported TB 592rwhp, bone stock 566rwhp

2017 Camaro SS 1LE - Procharger D1SC w/ Tial 2" BOV & Race intercooler / ARH full length catless headers / Alky meth injection system - 650rwhp on conservative tune SOLD
TJay74 is offline   Reply With Quote
Old 11-24-2018, 05:37 PM   #5
KingLT1


 
KingLT1's Avatar
 
Drives: 2016 1SS NFG A8
Join Date: Aug 2017
Location: 46804
Posts: 6,764
Congrats.

no low side pump upgrade?
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP
Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP
Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA
KingLT1 is offline   Reply With Quote
Old 11-24-2018, 06:52 PM   #6
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: BLUE CAMARO ZL1 1LE M6
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,218
Quote:
Originally Posted by Jfmoore79 View Post
I finally pulled the trigger on a P1X set up from JRE today and couldn’t be happier with my experience. Spoke to Al this morning and he was incredibly nice and helpful in answering my questions. Ted had worked on multiple quotes for me as I continued to change my mind on which direction to go. It’s been said many times but the entire Jannetty crew goes above and beyond. Also, I want to thank EyeFixStuff for his recommendations as my set up will be very similar. Here’s what I ended up with so far:

P1X, black, 9-10 lb pulley
Stage II intercooler
LT4 Fuel system
Voltage Booster
Off road mid pipes
AEM wide band
AEM OBD II gauge
LS3 Front crank seal
JRE Tune

I’m excited for a winter install!
Thank you for your business I look forward to tuning this for you.

Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 11-24-2018, 07:34 PM   #7
Drsagacity

 
Drsagacity's Avatar
 
Drives: 2017 Camaro 2SS Nightfall Gray vert
Join Date: Jan 2018
Location: Swansea, IL
Posts: 1,219
BAM! Congrats on your decision.

You are absolutely right, Ted has an awesome team that goes above and beyond...looking forward to tracking your results with another JRE Racing car on the prowl.

Next stop...time for the cam!
__________________
2017 Camaro 2SS vert - Nightfall Gray
Magnuson Heartbeat SC - Tuned by JRE Racing
776whp/745wtq (12psi)

2018 Corvette Z06 vert- Black
To be tuned by JRE Racing
TBD performance
Drsagacity is offline   Reply With Quote
Old 11-24-2018, 07:57 PM   #8
Jfmoore79
 
Jfmoore79's Avatar
 
Drives: 2016 Garnet Red 2SS A8
Join Date: Jul 2017
Location: Bowling Green, Ky
Posts: 124
Quote:
Originally Posted by KingLT1 View Post
Congrats.

no low side pump upgrade?
High side, low side, LT4 injectors, and voltage booster...better safe than sorry.
Jfmoore79 is offline   Reply With Quote
Old 11-24-2018, 08:01 PM   #9
Jfmoore79
 
Jfmoore79's Avatar
 
Drives: 2016 Garnet Red 2SS A8
Join Date: Jul 2017
Location: Bowling Green, Ky
Posts: 124
Quote:
Originally Posted by JANNETTYRACING View Post
Thank you for your business I look forward to tuning this for you.

Ted.
Thanks Ted. I am confident I will be grinning from ear to ear!
Jfmoore79 is offline   Reply With Quote
Old 11-25-2018, 06:53 AM   #10
Dysan911

 
Dysan911's Avatar
 
Drives: 2017 50th Anniversary 2SS
Join Date: Sep 2016
Location: Jacksonville, FL
Posts: 930
Congrats and welcome to the JRE Family. Ted is the man!
__________________
Former Ride: 17 Camaro 2SS, M6 - Fifty | Procharger P1SC | 3.7 Pulley | Stage 2 IC | Race Bypass | DSX FF Kit | JRE Custom E85 Flex Fuel Tune | LT4 Fuel System | JMS Voltage Booster | MSD Plug Wires | American Racing 1-7/8's LT Headers Full System Catback | Baro Breakout Harness | LT4 Map Sensor | Katech Ported TB | MMS Oil Catch Can | 160 Thermo | Solo Performance J-Pipes

Dysan911 is offline   Reply With Quote
Old 11-25-2018, 04:34 PM   #11
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: BLUE CAMARO ZL1 1LE M6
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,218
Thank you all, what a great bunch of guys!
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:32 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.