2016 Camaro 1.5 Lowering Springs - Page 15

laynlo15 · 06-01-2016, 09:16 PM

I actually looks pretty good with the stock wheels. I'll probably paint them black and put drag radials on the rear and a smaller tire on front for drag racing.

Richard0nee · 06-01-2016, 09:37 PM

Quote:

Originally Posted by laynlo15

I actually looks pretty good with the stock wheels. I'll probably paint them black and put drag radials on the rear and a smaller tire on front for drag racing.

Nice!! Yep I wud do the same

diirk · 06-02-2016, 09:20 AM

Are there any straight down the side shots so I can see how much tuck you have?

Ricardo@Phastek · 06-02-2016, 10:25 AM

Great pictures guys!! Send them in and I can get them on the site!!

SSHULK · 06-02-2016, 10:42 AM

Quote:

Originally Posted by laynlo15

I actually looks pretty good with the stock wheels. I'll probably paint them black and put drag radials on the rear and a smaller tire on front for drag racing.

Can you take a picture of how the front coils sit on the strut?

laynlo15 · 06-02-2016, 08:00 PM

Fits pretty dam good.

SSHULK · 06-02-2016, 11:07 PM

Oh yea that's a big difference, thanks for the photo

laynlo15 · 06-03-2016, 05:24 AM

Sure is.

SSHULK · 06-06-2016, 05:17 PM

Ordered today! Can't wait to install these

laynlo15 · 06-06-2016, 09:45 PM

I think you'll like them, the more I drive it the more I love them. With my wheel and tire combo its just bitchin. Thanks Ricardo

diirk · 06-06-2016, 09:50 PM

Quote:

Originally Posted by laynlo15

Fits pretty dam good.

The ones I just received are the original ones, not the new design.

SSHULK · 06-06-2016, 10:36 PM

Quote:

Originally Posted by laynlo15

I think you'll like them, the more I drive it the more I love them. With my wheel and tire combo its just bitchin. Thanks Ricardo

How does it ride? Does it feel stiffer? Would you say it handles better?

SSHULK · 06-06-2016, 10:37 PM

Quote:

Originally Posted by diirk

The ones I just received are the original ones, not the new design.

You tried them on? How can you tell?

diirk · 06-06-2016, 10:48 PM

I installed them. They are the original design, not the replacement. I only mentioned it because sine folks might take issue, so may want to verify prior to delivery which version you're getting.

I had already done the rear and had the front apart so just finished up. I left them a message since it was after business hours. Install took almost four hours working by myself. The video on the website was very helpful for completing the project.

06-01-2016, 09:16 PM	#197
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	I actually looks pretty good with the stock wheels. I'll probably paint them black and put drag radials on the rear and a smaller tire on front for drag racing. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

06-02-2016, 09:20 AM	#199
diirk Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Utah Posts: 713	Are there any straight down the side shots so I can see how much tuck you have? __________________ 16 2SS 6MT NPP White \| MRR \| ACT \| JBA \| SCT \| C7C 04 Ram 2500 CDT 4x4 Quad 91 Miata 1.8 Feal Wilwood Track Car 1morproject

06-02-2016, 08:00 PM	#202
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Fits pretty dam good. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

06-02-2016, 11:07 PM	#203
SSHULK Drives: 2016 Camaro SS NPP Join Date: Mar 2016 Location: Miami, FL Posts: 142	Oh yea that's a big difference, thanks for the photo __________________ 2016 Camaro SS - Nightfall Grey 1999 Camaro SS - Torch Red 1995 Camaro RS - Torch Red

06-03-2016, 05:24 AM	#204
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Sure is. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

06-02-2016, 10:25 AM	#200
Ricardo@Phastek Drives: the boss nuts.... Join Date: Aug 2012 Location: Houston, TX Posts: 1,428	Great pictures guys!! Send them in and I can get them on the site!!

06-06-2016, 05:17 PM	#205
SSHULK Drives: 2016 Camaro SS NPP Join Date: Mar 2016 Location: Miami, FL Posts: 142	Ordered today! Can't wait to install these __________________ 2016 Camaro SS - Nightfall Grey 1999 Camaro SS - Torch Red 1995 Camaro RS - Torch Red

06-06-2016, 09:45 PM	#206
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	I think you'll like them, the more I drive it the more I love them. With my wheel and tire combo its just bitchin. Thanks Ricardo __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

06-06-2016, 10:48 PM	#210
diirk Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Utah Posts: 713	I installed them. They are the original design, not the replacement. I only mentioned it because sine folks might take issue, so may want to verify prior to delivery which version you're getting. I had already done the rear and had the front apart so just finished up. I left them a message since it was after business hours. Install took almost four hours working by myself. The video on the website was very helpful for completing the project. __________________ 16 2SS 6MT NPP White \| MRR \| ACT \| JBA \| SCT \| C7C 04 Ram 2500 CDT 4x4 Quad 91 Miata 1.8 Feal Wilwood Track Car 1morproject

User Name		Remember Me?
Password