09-03-2018, 11:53 AM | #1 |
Drives: 2016 2SS, SW Join Date: Oct 2009
Location: Chicago Suburbs
Posts: 1,079
|
Another Dash Cam Install
Pretty similar to what has already been posted, but the twist here is that I'm actually adding a USB power connection in the overhead console. My last two dash cams used USB cables, so a 12V connection would not work.
It starts with the USB board from Amazon... https://www.amazon.com/gp/product/B07121W7Q4 I soldered some short wires onto it and then just wrapped it in electrical tape. I then connected power by tapping the violet/white and black wires. There is already a notch in the headliner that I ran the USB cable through. I rolled-up and tucked-in the extra cable and plugged into the board. As noted elsewhere, this connection point does not turn on unless the car is running. |
Post Reply
|
|
|