02-27-2019, 08:47 PM | #1 |
Drives: 2015 camaro ss Join Date: Feb 2018
Location: New mexico
Posts: 5
|
2015 camaro ss lsa help no crank
I've been installing a Adm lsa kit. I also installed the dsx flex fuel at the same time. Went to crank the car over for the first time after install no crank. I have 2 codes one is 0100 lost communication with ecm A. Second is p2535 ignition switch circuit high. I had the battery disconnected during install. I have rechecked the grounds, the ecm pins, tried clearing the codes but no dice. Also service stabikitrak is on, and a notification saying no ac engine tempt to hot. Any help fixing this would be great guys!
__________________
2015 Camaro ss,cai,long tubes, dsx flex fuel, lunati cam.
|
01-02-2023, 07:12 PM | #2 |
Drives: 2014 Camaro 1LE Join Date: Mar 2017
Location: Lemoore, CA
Posts: 15
|
Did you ever figure out the problem? I was having the similar issue for a while and now my car will finally start but I still have the codes and the idle is higher than usual
|
|
|
Tags |
forced induction, lsa |
|
|