You are browsing camaro6 
03-24-2024, 05:54 PM
|
#1 |
         
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,559
|
How much gas in the ZL1 tank?
How much gas do you want in the tank at the starting line? 2-3 gal.?
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
|
|
03-24-2024, 09:38 PM
|
#2 |
 
Drives: 2017 Chevrolet Camaro ZL1 Join Date: Jul 2018
Location: Canton, GA
Posts: 405
|
I have the Fore system so we always run it at least 3/4 tank so it doesn’t cavitate, but with the stock pump I would run it at 1/4 tank to save weight.
__________________
2017 ZL1 - PB 8.05 @ 172 MPH @ 3730 lbs @ 70 DA (work in progress)
Built by Vengeance Racing, tuned by Elite Tuned |
|
|
|
|
03-25-2024, 07:57 PM
|
#3 |
|
aka BeastZL1
Drives: 2019 Camaro ZL1 1LE, 2004 Cobra Join Date: Dec 2017
Location: NC
Posts: 1,103
|
I would recommend no less than 1/4 a tank, which is 4.75 gallons. I've had fuel starvation issues on the road course (lateral G) with less.
__________________
|
|
|
|
|
03-28-2024, 08:42 PM
|
#4 |
|
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,559
|
There's no need to create a new thread for this question:
I use 1st gear delete, so in the water box, can I start the tires spinning in 2nd and quicklyshift to 3rd w/o endangering clutches? Using MT ET Street R 325/15
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
