wheel and tire size? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Hattaway66 · 02-03-2019, 04:44 PM

i'm looking to get new rims and tires for my 2010 SS. I'm wanting a wider look (flush with the body or poking out a little) than the stock ones and im just trying to figure out what size and offset im gonna need to get that look. I also want to have a meaty look for the rear as well. lmk what brands to look at and feel free to drop some photos of yall's cars as well!

silverstorm · 02-03-2019, 05:01 PM

This was my before and after. The stock was 7.5 and the after is 10 with 275. I don't use spacers, but they would help with poking them out

BAD DAB · 02-03-2019, 05:23 PM

I have a 315 on the rear. I had to go with a 11 inch rim.

pnwdan · 02-04-2019, 07:30 AM

I'm running 275 up front 20x9 +35 and 305 in the rear 20x11 +40
they poke out of the bottom just enough that i had to use the rock guards to save the paint

Hattaway66 · 02-04-2019, 07:41 PM

Quote:

Originally Posted by pnwdan

I'm running 275 up front 20x9 +35 and 305 in the rear 20x11 +40
they poke out of the bottom just enough that i had to use the rock guards to save the paint

car looks good, what brand rims and tires?

pnwdan · 02-04-2019, 07:45 PM

Quote:

Originally Posted by Hattaway66

car looks good, what brand rims and tires?

The wheels are Bravado Tribute and the tires are Pirellis . This pic kinda shows where that offset sits on these cars. A lot of people are running similar offsets and tires. This combined with a good set of springs really brings the mean out in these gen 5s

Sent from my SM-N960U using Tapatalk

02-03-2019, 04:44 PM	#1
Hattaway66 Drives: 2010 Camaro 2SS LS3 Join Date: Jun 2018 Location: Mansfield, TX Posts: 4	wheel and tire size? i'm looking to get new rims and tires for my 2010 SS. I'm wanting a wider look (flush with the body or poking out a little) than the stock ones and im just trying to figure out what size and offset im gonna need to get that look. I also want to have a meaty look for the rear as well. lmk what brands to look at and feel free to drop some photos of yall's cars as well!

02-03-2019, 05:01 PM	#2
silverstorm Drives: 2014 Camaro 2LS Join Date: Mar 2018 Location: Nashville, TN Posts: 213 View My Garage	This was my before and after. The stock was 7.5 and the after is 10 with 275. I don't use spacers, but they would help with poking them out Attached Images Last edited by silverstorm; 02-03-2019 at 05:39 PM.

02-03-2019, 05:23 PM	#3
BAD DAB Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010 Location: Richmond, VA Posts: 8,228 View My Garage	I have a 315 on the rear. I had to go with a 11 inch rim. Attached Images __________________ STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN

02-04-2019, 07:30 AM	#4
pnwdan Drives: 2014 2SS/RS Join Date: Jan 2018 Location: Washington Posts: 848	I'm running 275 up front 20x9 +35 and 305 in the rear 20x11 +40 they poke out of the bottom just enough that i had to use the rock guards to save the paint __________________ 2014 2SS/RS LS3/M6