eBay Rear diffuser Review - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BrianKC · 11-14-2016, 11:55 PM

Got everything done over the weekend! Couple of complaints... The tabs seemed to break off really easily. I lost at least 4 tabs because they're pointed down just enough that they miss their hole when installing. Frustrating but even with only half the tabs it looks and works just fine. I also used some black zip ties to utilize the missing screw holes across the middle of the diffuser.
Taking the stock diffuser off was just as much of a pain as people said it would be haha but it does come off.
Here are some pictures. I did plasti-dip it because that's the easiest way to get the matte black I wanted.

Sent from my SAMSUNG-SM-G891A using Tapatalk

FUEGO · 11-16-2016, 10:10 AM

Yea i had the same problems with those tabs but it still stays on and yeah stock diffuser is hell to get off lol just makes the new diffuser that much better lol. Looks good man thanks for sharing!

foo.fighter · 11-24-2016, 12:24 PM

guys can someone please share the ebay link. i wanted to see if the seller has something that fits the npp dual exhaust..

FUEGO · 12-13-2016, 09:30 PM

Quote:

Originally Posted by foo.fighter

guys can someone please share the ebay link. i wanted to see if the seller has something that fits the npp dual exhaust..

http://m.ebay.com/itm/10-13-Chevy-Ca...=1440436371010

CodyBanks · 12-30-2016, 06:11 PM

This with dual exhaust is perfect

foo.fighter · 01-03-2017, 03:48 PM

Quote:

Originally Posted by CodyBanks

This with dual exhaust is perfect

unfortunately it doesn't look like there is a version that supports the double exhaust. just a single outlet sighhh

GodWentPunk · 01-04-2017, 09:50 AM

THREAD HIJACK**

So, the grill.. upper/lower... I'm looking to do the same to my car. Can you tell me what brand you have and your experience with it.

thanks,

joe...

btw, The deeper fins look much better

dhardy14 · 01-04-2017, 10:51 AM

I've had mine installed now for about 1.5 months. I love the look of this, however I lost more than half of the tabs while installing this...actually, when I first originally received the package, a couple of tabs had broken off during shipment. I used epoxy to put them back on but that really did nothing. Taking the originial diffuser off is a pain UNLESS you spray down with WD-40! I was worried there would be a little bit of a vibration since mine is really only held down with the bolts, but no problems so far!

digdeep0169 · 01-04-2017, 11:38 AM

looks good... but guys don't knock the havoc i've had ZERO issues with mine and still cutting 11 secs down the 1/4

FUEGO · 01-16-2017, 12:16 AM

Quote:

Originally Posted by GodWentPunk

THREAD HIJACK**

So, the grill.. upper/lower... I'm looking to do the same to my car. Can you tell me what brand you have and your experience with it.

thanks,

joe...

btw, The deeper fins look much better

It's called the phantom grille.. pretty simple install remove the front bowtie .. I used a YouTube video for reference .. think it was like $100

ELCAMAROSS · 02-14-2017, 12:52 PM

I wanted to purchase this a couple of months ago but was skeptical. Thanks for this!

ELCAMAROSS · 02-14-2017, 01:01 PM

Also, what paint can brand did you use?

ELCAMAROSS · 02-14-2017, 01:02 PM

Very true! much much nicer but really expensive compare to this one for $150

TwentyTen2SSRS · 02-17-2017, 12:24 AM

I'm wanting to do this slsobhit have the NPP now but just not functional. Does this bolt up or still catch this pocket of air in it?

Sent from my iPhone using Tapatalk

11-14-2016, 11:55 PM	#15
BrianKC Drives: 2007 Corvette Z06 Join Date: Feb 2015 Location: Kansas City Posts: 87 View My Garage	Got everything done over the weekend! Couple of complaints... The tabs seemed to break off really easily. I lost at least 4 tabs because they're pointed down just enough that they miss their hole when installing. Frustrating but even with only half the tabs it looks and works just fine. I also used some black zip ties to utilize the missing screw holes across the middle of the diffuser. Taking the stock diffuser off was just as much of a pain as people said it would be haha but it does come off. Here are some pictures. I did plasti-dip it because that's the easiest way to get the matte black I wanted. Sent from my SAMSUNG-SM-G891A using Tapatalk __________________ 2007 Corvette Z06 LS7 475/440 RWHP/TQ Corsas CAI 2010 Camaro SS LS3 410/427 RWHP/TQ (SOLD) Kooks Headers Vararam Intake Eaton Tru-Trac 3.91 Rear Diff Hurst Short Throw Shifter Anvil Notch Spoiler in gloss carbon RPI Front Splitter ZL1 Dual Mode Mufflers

11-16-2016, 10:10 AM	#16
FUEGO BEASST Drives: Murderd convertible Join Date: Aug 2016 Location: Sacramento CA Posts: 83	Yea i had the same problems with those tabs but it still stays on and yeah stock diffuser is hell to get off lol just makes the new diffuser that much better lol. Looks good man thanks for sharing! __________________ 2011 SS L99

11-24-2016, 12:24 PM	#17
foo.fighter Drives: 2013 Camaro 2SS IOM M6 Join Date: Mar 2013 Location: Toronto Posts: 342 View My Garage	guys can someone please share the ebay link. i wanted to see if the seller has something that fits the npp dual exhaust.. __________________ 2013 2SS IOM LS3 Performance: NPP Exhaust, Solo Performance Hi-Flow Cats, k&n Air Intake, Doug Thorley Shorty Headers Cosmetic: Diablo Angel Staggered 22", 3D Carbon Fenders (need to install) Eagle Eyes HIDs, Fog Light HIDs

01-04-2017, 09:50 AM	#21
GodWentPunk Drives: 2015 2SS White Convertible CE/INDY Join Date: Mar 2016 Location: Lockport, IL Posts: 780 View My Garage	THREAD HIJACK** So, the grill.. upper/lower... I'm looking to do the same to my car. Can you tell me what brand you have and your experience with it. thanks, joe... btw, The deeper fins look much better __________________ ARH LTH/HFC/Legato muffler, RDP Custom Tune, K&N Blackhawk CAI, Bigworm Blackout kit, ZL1 Rims, Phantom Grills, VMAX PTB

01-04-2017, 10:51 AM	#22
dhardy14 Drives: 2011 Chevrolet Camaro 2LT Join Date: Sep 2016 Location: Gainesville, VA Posts: 12	Love mine but... I've had mine installed now for about 1.5 months. I love the look of this, however I lost more than half of the tabs while installing this...actually, when I first originally received the package, a couple of tabs had broken off during shipment. I used epoxy to put them back on but that really did nothing. Taking the originial diffuser off is a pain UNLESS you spray down with WD-40! I was worried there would be a little bit of a vibration since mine is really only held down with the bolts, but no problems so far! Attached Images

12-30-2016, 06:11 PM	#19
CodyBanks CodyBanks Drives: 2011 Camaro Join Date: Aug 2012 Location: New York Posts: 110	This with dual exhaust is perfect

01-04-2017, 11:38 AM	#23
digdeep0169 Drives: 2012 Camaro SS 45th Anniversary Join Date: Sep 2013 Location: Albuquerque Posts: 963 View My Garage	looks good... but guys don't knock the havoc i've had ZERO issues with mine and still cutting 11 secs down the 1/4 __________________ ~ 2012 SS ~

02-14-2017, 12:52 PM	#25
ELCAMAROSS Drives: Black 2SS Camaro 2010 Join Date: Jul 2014 Location: Los Angeles Posts: 43	I wanted to purchase this a couple of months ago but was skeptical. Thanks for this!

02-14-2017, 01:01 PM	#26
ELCAMAROSS Drives: Black 2SS Camaro 2010 Join Date: Jul 2014 Location: Los Angeles Posts: 43	Also, what paint can brand did you use?

02-14-2017, 01:02 PM	#27
ELCAMAROSS Drives: Black 2SS Camaro 2010 Join Date: Jul 2014 Location: Los Angeles Posts: 43	Very true! much much nicer but really expensive compare to this one for $150

02-17-2017, 12:24 AM	#28
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	I'm wanting to do this slsobhit have the NPP now but just not functional. Does this bolt up or still catch this pocket of air in it? Sent from my iPhone using Tapatalk __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)