Front Lip Splitter V6

Symbolic · 01-23-2019, 05:48 AM

Hey guys, just wondering what kind of splitter everyone runs on their camaros on here. I'm in the market looking for a splitter and was wondering what brands everyone uses?

IAI80 · 02-19-2019, 09:18 PM

I bought this inexpensive one from Ikon Motorsports for a V6. Easy to install with the factory bolts that are already installed along the bottom front of the car. You don't need the hardware that comes with it. Bought the RS style spoiler painted to match also. Didn't feel like drilling, so I secured it with VHB tape. I thought the VHB tape they supplied could have been a bit wider, so I bought my own. Both have been on for 6 months in heat and bitter cold and feel completely secure. Dresses up the basic LT car nicely for not too much money.

https://www.ikonmotorsports.com/cata...?q=2017+camaro

Boogie4bear · 02-20-2019, 04:06 PM

Quote:

Originally Posted by IAI80

I bought this inexpensive one from Ikon Motorsports for a V6. Easy to install with the factory bolts that are already installed along the bottom front of the car. You don't need the hardware that comes with it. Bought the RS style spoiler painted to match also. Didn't feel like drilling, so I secured it with VHB tape. I thought the VHB tape they supplied could have been a bit wider, so I bought my own. Both have been on for 6 months in heat and bitter cold and feel completely secure. Dresses up the basic LT car nicely for not too much money.

https://www.ikonmotorsports.com/cata...?q=2017+camaro

I bought the same one. I really like it

kraut1971 · 02-20-2019, 04:26 PM

Can either of you post pics of this on your car? I'm definitely interested in this splitter, but would love to see some actual photos on an RS.

Glen e · 02-20-2019, 04:38 PM

Genuine gm splitter from their access catalog, made for v6:

HCI2000SS · 02-21-2019, 04:45 PM

Crazy question, but do these splitters block any airflow that effect cooling or anything?

IAI80 · 02-22-2019, 10:17 AM

Quote:

Originally Posted by HCI2000SS

Crazy question, but do these splitters block any airflow that effect cooling or anything?

I’d say not at all but you be the judge. It did a great job of covering up the curb rash that the first owner left behind.

HCI2000SS · 02-22-2019, 10:43 AM

Quote:

Originally Posted by IAI80

I’d say not at all but you be the judge. It did a great job of covering up the curb rash that the first owner left behind.

It looks like that splitter doesn't hang low enough to block the factory air deflectors, so that's good. Would you happen to have more pics of that splitter on your car? I'm really liking the price

IAI80 · 02-22-2019, 11:18 AM

Quote:

Originally Posted by HCI2000SS

It looks like that splitter doesn't hang low enough to block the factory air deflectors, so that's good. Would you happen to have more pics of that splitter on your car? I'm really liking the price

Here you go:

HCI2000SS · 02-22-2019, 11:26 AM

Quote:

Originally Posted by IAI80

Here you go:

Perfect thank you! Any issues with fitment, or any complaints at all?

IAI80 · 02-22-2019, 12:00 PM

Quote:

Originally Posted by HCI2000SS

Perfect thank you! Any issues with fitment, or any complaints at all?

I have no complaints so far, it fits well and went on with no problems. I figure that if I’m unfortunate enough to take a decent sized rock (especially on a cold day) that a crack is possible. I couldn’t say if this one would be any more vulnerable to that than the one GM would sell you coming from the factory. No damage so far though and it’s been on since last July.

Kaseikei · 02-22-2019, 12:15 PM

IAI80 I've been snooping on this thread. The fitment is the same for the 4cyl turbo right?

Also can you post the specific links to the one you purchased pre-painted?

Also has anyone gotten sideskirts for our 4/6 bangers?

HCI2000SS · 02-22-2019, 12:16 PM

Quote:

Originally Posted by IAI80

I have no complaints so far, it fits well and went on with no problems. I figure that if I’m unfortunate enough to take a decent sized rock (especially on a cold day) that a crack is possible. I couldn’t say if this one would be any more vulnerable to that than the one GM would sell you coming from the factory. No damage so far though and it’s been on since last July.

Good to know. Thanks for all the info. Considering the price on this one, I see no reason to pay damn near double for some of the others

Start The Machine · 02-22-2019, 04:25 PM

Zero issues with mine. Fits perfect.

01-23-2019, 05:48 AM	#1
Symbolic Drives: 2017 1LT Hyper Blue Join Date: Dec 2018 Location: HI Posts: 1	Front Lip Splitter V6 Hey guys, just wondering what kind of splitter everyone runs on their camaros on here. I'm in the market looking for a splitter and was wondering what brands everyone uses?

02-20-2019, 04:26 PM	#4
kraut1971 BITCHN Camaro Drives: SOLD! Back in the looking zone... Join Date: Feb 2015 Location: Saline, MI Posts: 248 View My Garage	Can either of you post pics of this on your car? I'm definitely interested in this splitter, but would love to see some actual photos on an RS. __________________ BITCHN

02-20-2019, 04:38 PM	#5
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	Genuine gm splitter from their access catalog, made for v6: __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

02-22-2019, 04:25 PM	#14
Start The Machine Drives: 2016 M6 2.0T Join Date: Nov 2016 Location: Gig Harbor, WA Posts: 838	Zero issues with mine. Fits perfect. Attached Images __________________ RS Package, HD Cooling Package, Brembo 6 Piston Front Brakes, SRP Racing Pedals, Soler Performance Throttle Controller, Dyno Tuned by Trifecta, Velossa Tech Ram Air, Mishimoto Intake, aFe Air Filter, Mishimoto Charge Pipes, ZZP 67mm Throttle Body, Trifecta T40 Stage 2 Turbo, JacFab Recirculation Valve, PTP Turbo Blanket, ZZP Catted Downpipe, Mishimoto Pro Cat-Back Quad Tip Exhaust, Mishimoto Catch Cans, Mishimoto Coolant Reservoir Tank, GM SEMA Grill, Ikon Motorsports Front Fascia Extension, Ikon Motorsports 1LE Spoiler, American Authority ZL1 Side Skirts, AMPP Quad Tip Rear Valance

02-19-2019, 09:18 PM	#2
IAI80 Drives: 2016 1LT V6 A8 Join Date: Oct 2018 Location: Wyoming Posts: 85	I bought this inexpensive one from Ikon Motorsports for a V6. Easy to install with the factory bolts that are already installed along the bottom front of the car. You don't need the hardware that comes with it. Bought the RS style spoiler painted to match also. Didn't feel like drilling, so I secured it with VHB tape. I thought the VHB tape they supplied could have been a bit wider, so I bought my own. Both have been on for 6 months in heat and bitter cold and feel completely secure. Dresses up the basic LT car nicely for not too much money. https://www.ikonmotorsports.com/cata...?q=2017+camaro

02-21-2019, 04:45 PM	#6
HCI2000SS Drives: 2018 Camaro V6/RS Join Date: Nov 2018 Location: MI Posts: 1,596	Crazy question, but do these splitters block any airflow that effect cooling or anything?

02-22-2019, 12:15 PM	#12
Kaseikei Drives: 2018 Summit White 1LT Join Date: Jan 2019 Location: Miami Posts: 48	IAI80 I've been snooping on this thread. The fitment is the same for the 4cyl turbo right? Also can you post the specific links to the one you purchased pre-painted? Also has anyone gotten sideskirts for our 4/6 bangers?

User Name		Remember Me?
Password