08-07-2018, 04:31 AM | #1 |
Drives: 2016 2.0t Join Date: Jun 2018
Location: Russia
Posts: 4
|
2.0 LTG tune by HPTuners interface
Hello from other side of Earth)
Camaro 6 2.0 LTG Automatic (only 238 hp stock ) 6.3 seconds 0-100 km/h (0-61 m/h) I tried to change calibrations by HPTuners MPVI2. Some calibration from 275 hp stock file, some calibration - as I see it (about 4 days to understand only ~10% of total calibrations ). Result: 5.7s - not so good(( Several questions: 1. Write options: Entire or Calibration. Are there any differences? 2. Where to find, or may be exist sample calibration .hpt file to tune 2.0 LTG for about 300 hp. I found only Caddy ATS stg1 file on HTP repositorium, but I have some doubt ATS calibration 100% suitable. 3. May be somebody can take a look for my file and give me some advices. Don't know is it normal practice or not, sorry) Can't attache my tune file here (zip) p.s. Sorry for bad english) |
04-12-2023, 02:03 AM | #2 |
Drives: camaro ss Join Date: Sep 2022
Location: YY
Posts: 2
|
ats can also
|
04-12-2023, 05:58 PM | #3 |
Long hauler
|
Most people go the remote tuning route, though there are communities for self-tuning. I believe a majority of us have someone tune the car though. As well as the majority of posts here being for the LT1/LT4 tuning wise
I may be wrong but write entire would be overwriting the whole existing tune and calibration would only change the values that are different between them.
__________________
|
04-12-2023, 10:16 PM | #4 |
Drives: '16 2SS M6 Join Date: Aug 2019
Location: Hughes Springs, TX
Posts: 320
|
If you join the HP Tuner forum, you can ask the same question and share your file there for others to review.
__________________
David
'16 2SS M6 black on black, SW long tube full exhaust, NPP, Roto-fab CAI, ported stock TB '16 2SS M6 black w/Metallic black stripes, Kalahari, 6 piston front (totaled 1/22/20) '14 Fusion Titanium 2.0T '83 Jeep Wagoneer |
04-13-2023, 05:51 PM | #5 |
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,675
|
ZZP
Add the flex fuel sensor Write cal
__________________
‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122
‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
|
|
Post Reply
|
|
|