You are browsing camaro6 
05-07-2023, 09:16 AM
|
#1 |
 Drives: 2016 Camaro SS 2017 Yukon Denali Join Date: Jan 2020
Location: Colorado
Posts: 116
|
Intercooler dumping coolant
Not on a camaro, but an edelbrock 2650 installed on a 2017 Yukon 6.2
After driving especially when hot, I will find evidence of coolant coming out of the reservoir for the intercooler. Is it more likely that there is still air in the system or maybe the cap is defective? The coolant never seems to get really hot, I can touch the hoses even after a long drive. |
|
|
|
05-07-2023, 01:33 PM
|
#2 |
          
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,761
|
Cap is likely defective. See if you can put a pressure test on it… just a few psi should be enough.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
|
|
|
|
05-07-2023, 02:50 PM
|
#3 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
If its doing that I would check to make sure its actually circulating properly. Could have a air pocket in it. Take the cap off and don't start it but put it in the accessary mode and the pump should start running. Make sure the coolant is swirling above the top hose, if not add some water or coolant until it does. The coolant should feel warm but not hot like your engine coolant.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
