[arpad_m]

Originally Posted by kseguin

What wiring kit do you use, the link is no longer valid?

Try my method described in https://www.camaro6.com/forums/showp...7&postcount=20 that I have used with two different Blackvue dashcams. Easy install, even total amateur yours truly could pull it off in about two houirs, almost invisible from inside the car, wiring in the trunk looks "almost OEM", heh, and most importantly, the setup has been working 100% reliably since April 2018.

[2ss.alex]

What did you guys end up using? i need constant 12v power for my dash cam

[Lethal6.2LE]

Originally Posted by 2ss.alex

What did you guys end up using? i need constant 12v power for my dash cam

Looking for the same answer but have an additional question as well. Are we able to use the fuse box under the hood? If so, what 2 fuses do you all recommend to tap into?

[keep_hope_alive]

They describe their methods in the referenced thread: https://www.camaro6.com/forums/showt...7#post10254807

[Lethal6.2LE]

Originally Posted by keep_hope_alive

They describe their methods in the referenced thread: https://www.camaro6.com/forums/showt...7#post10254807

I read through it but it seems they all used the back fuse box in the trunk. I'm looking to use the front box, and came across a few videos online and people used F29 for constant and F58 for accessory. However these videos are from 2018, so just wanted to make sure these fuses are good to tap into.