Deeper wheel look - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mike Cordero · 05-19-2019, 10:00 AM

Planning to buy some mrr 228 for my camaro. I want that look as deep or concave as possible. Planning to use 10 and 11 combo. phastek sells 34-35 offset for all four corners, which would look better, 23's or 34's in front or 34's or 43'in the rear?

hazy · 05-21-2019, 12:28 PM

+23 front, and +43 rear will likely be the look you're going for - HERE is my setup with those specs, lemme know if you want additional pics, these are quite old.

grammy · 05-22-2019, 08:15 AM

Quote:

Originally Posted by Mike Cordero

Planning to buy some mrr 228 for my camaro. I want that look as deep or concave as possible. Planning to use 10 and 11 combo. phastek sells 34-35 offset for all four corners, which would look better, 23's or 34's in front or 34's or 43'in the rear?

Same wheel set up as Hazy. 285/35/20 front & 315/35/20 rear

Mike Cordero · 05-22-2019, 07:28 PM

Quote:

Originally Posted by grammy

Same wheel set up as Hazy. 285/35/20 front & 315/35/20 rear

285/35 is wider and lower than the 275/40, sp do the 285 would go outer at fender than the 275?

05-19-2019, 10:00 AM	#1
Mike Cordero Drives: 1971 Camaro Z-28 Join Date: Sep 2015 Location: Puerto Rico Posts: 318	Deeper wheel look Planning to buy some mrr 228 for my camaro. I want that look as deep or concave as possible. Planning to use 10 and 11 combo. phastek sells 34-35 offset for all four corners, which would look better, 23's or 34's in front or 34's or 43'in the rear?

05-21-2019, 12:28 PM	#2
hazy Drives: 2011 2SS/RS Join Date: Feb 2014 Location: H-Town Posts: 1,037	+23 front, and +43 rear will likely be the look you're going for - HERE is my setup with those specs, lemme know if you want additional pics, these are quite old.