Wide body front fenders +1" with vents - Help us design our new fenders! - Page 7

kropscamaro16 · 06-21-2019, 12:01 PM

haha holy shit thats crazy

crankaholic · 06-21-2019, 08:56 PM

I'd be interested in something like this... based on the GT3 RS. The vent would make up most of the 1" extra width.

edit: those blades are maybe sticking out a bit much... it was a quick 'shop, pardon the crudeness

soloknight6 · 06-24-2019, 10:45 AM

That looks fantastic. Would be functional too.

WallsAndFoundations · 07-04-2019, 01:21 AM

I'm surprised no one has mentioned it yet, but would it be possible to offer a SLIGHTLY less aggressive additional width option? Instead of 1.5" per side, maybe a half inch option per side? Just enough to add a bit extra room for tire to not scrub but still be able to stuff some 305s on a 10.5 width wheel?

I'm lowered 1.85" on a 19x10.5+25 square setup, and have 285/35/19 tires. +1.5" a corner just would look a lil funky considering the rears are practically inline with the front fenders. Loving option 1 or 2 otherwise though

Edit: for us lowered folks I mean. I know 305s will work just fine on stock ride height on a 10.5

/G\ Nupe · 07-17-2019, 01:38 PM

Wish it was bolt on. My whole kit is outfitted based on stock fenders.

Joey Soul · 07-18-2019, 12:05 PM

Needs bolt on Flairs to bring out the rear to match

kropscamaro16 · 07-18-2019, 12:08 PM

Quote:

Originally Posted by Joey Soul

Needs bolt on Flairs to bring out the rear to match

#doitforthegram !

Muthstryker · 07-23-2019, 12:03 PM

Are these DOA?

C7 Carbon · 07-29-2019, 12:45 PM

PMs replied, stay tuned for updates!

C7 Carbon · 08-01-2019, 11:24 AM

Hey guys sorry for the delays with this project. After we printed off several prototype fenders, we felt that the width we wanted to originally make the fenders (1.5" Just wasn't wide enough. We wanted to be able to offer a fender that really helped cover the tires and improve functionality.

With these new resign / update, we also saw that we would need to extend out the bumper or make a separate extension to blend back into the lines due to the extra width of the front fender. These new setup will be the perfect package to add width & functionality.

Package now includes:
- 2" Wider fenders
- Fender Extensions
- ZL1 1LE Style front splitter to bolt the fender extensions to

Revised concept pictures:

DarkFangz1100 · 08-02-2019, 09:12 AM

Quote:

Originally Posted by C7 Carbon

Hey guys sorry for the delays with this project. After we printed off several prototype fenders, we felt that the width we wanted to originally make the fenders (1.5" Just wasn't wide enough. We wanted to be able to offer a fender that really helped cover the tires and improve functionality.

With these new resign / update, we also saw that we would need to extend out the bumper or make a separate extension to blend back into the lines due to the extra width of the front fender. These new setup will be the perfect package to add width & functionality.

Package now includes:
- 2" Wider fenders
- Fender Extensions
- ZL1 1LE Style front splitter to bolt the fender extensions to

Revised concept pictures:

So....basically if you have an aftermarket bumper or an LT your fenders won't fit? Going off the SS bumper in the revision

ZLBlue · 08-07-2019, 06:26 PM

Quote:

Originally Posted by C7 Carbon

Hey guys sorry for the delays with this project. After we printed off several prototype fenders, we felt that the width we wanted to originally make the fenders (1.5" Just wasn't wide enough. We wanted to be able to offer a fender that really helped cover the tires and improve functionality.

With these new resign / update, we also saw that we would need to extend out the bumper or make a separate extension to blend back into the lines due to the extra width of the front fender. These new setup will be the perfect package to add width & functionality.

Package now includes:
- 2" Wider fenders
- Fender Extensions
- ZL1 1LE Style front splitter to bolt the fender extensions to

Revised concept pictures:

Will you be able to have an option for ZL1s since it's a wider front?

C7 Carbon · 08-08-2019, 08:00 PM

We may have an option available for the ZL1 later on as soon as we have a chance to do the proper development and testing for it. However, for the time being we'll focus the development for the SS. More updates coming soon!

Tha_Infamous_E · 12-08-2019, 07:30 AM

Quote:

Originally Posted by C7 Carbon

We may have an option available for the ZL1 later on as soon as we have a chance to do the proper development and testing for it. However, for the time being we'll focus the development for the SS. More updates coming soon!

Any updates on release date?

06-21-2019, 12:01 PM	#85
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,816	haha holy shit thats crazy __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

06-21-2019, 08:56 PM	#86
crankaholic Drives: 2016 Camaro 2SS Join Date: Dec 2015 Location: Philadelphia Posts: 771	I'd be interested in something like this... based on the GT3 RS. The vent would make up most of the 1" extra width. edit: those blades are maybe sticking out a bit much... it was a quick 'shop, pardon the crudeness __________________ Last edited by crankaholic; 06-24-2019 at 12:32 PM.

06-24-2019, 10:45 AM	#87
soloknight6 SoCal HT5! SD Drives: 2016 red hot 2ss M6 Join Date: Nov 2011 Location: San Diego CA, Posts: 1,929	That looks fantastic. Would be functional too. __________________ http://www.camaro5.com/forums/showth...37#post5437037 By my deeds, I honor him. V8!!!

07-04-2019, 01:21 AM	#88
WallsAndFoundations IG: Infinite.Drive Drives: 2016 Camaro 2SS in Summit White Join Date: Jul 2016 Location: Puyallup, WA Posts: 76	I'm surprised no one has mentioned it yet, but would it be possible to offer a SLIGHTLY less aggressive additional width option? Instead of 1.5" per side, maybe a half inch option per side? Just enough to add a bit extra room for tire to not scrub but still be able to stuff some 305s on a 10.5 width wheel? I'm lowered 1.85" on a 19x10.5+25 square setup, and have 285/35/19 tires. +1.5" a corner just would look a lil funky considering the rears are practically inline with the front fenders. Loving option 1 or 2 otherwise though Edit: for us lowered folks I mean. I know 305s will work just fine on stock ride height on a 10.5 __________________ ________ Fight your mind Last edited by WallsAndFoundations; 07-04-2019 at 02:25 AM. Reason: Clarity

07-17-2019, 01:38 PM	#89
/G\ Nupe Drives: 2016 Camaro 2.0T Join Date: Dec 2018 Location: Atlanta, GA Posts: 1	Wish it was bolt on. My whole kit is outfitted based on stock fenders.
$/G\ Nupe is offline$

07-18-2019, 12:05 PM	#90
Joey Soul The Mechanic Drives: 1SS M Join Date: Dec 2017 Location: NJ Posts: 291	Needs bolt on Flairs to bring out the rear to match __________________ BTR 225 w/CNC Heads\|JLT intake\|Speed Engineering 1"7/8 long tube and mid pipe\|LT2 manifold w/95mmTb\|Self tuned w/HPtuners\|Silvers 2Way coilovers\|Hotchkis front sway\|Advan AD08R\|BMR solid cradle bushings\|Recaro SR7\| Work ZR10 19"

07-23-2019, 12:03 PM	#92
Muthstryker Drives: Black SS Join Date: Mar 2018 Location: Marysville. WA Posts: 18	Are these DOA?

07-29-2019, 12:45 PM	#93
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	PMs replied, stay tuned for updates!

08-01-2019, 11:24 AM	#94
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	WB Fender update and change to 2" Hey guys sorry for the delays with this project. After we printed off several prototype fenders, we felt that the width we wanted to originally make the fenders (1.5" Just wasn't wide enough. We wanted to be able to offer a fender that really helped cover the tires and improve functionality. With these new resign / update, we also saw that we would need to extend out the bumper or make a separate extension to blend back into the lines due to the extra width of the front fender. These new setup will be the perfect package to add width & functionality. Package now includes: - 2" Wider fenders - Fender Extensions - ZL1 1LE Style front splitter to bolt the fender extensions to Revised concept pictures:

08-08-2019, 08:00 PM	#97
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	We may have an option available for the ZL1 later on as soon as we have a chance to do the proper development and testing for it. However, for the time being we'll focus the development for the SS. More updates coming soon!

User Name		Remember Me?
Password