[BradfordCamaro]

Originally Posted by DOHCVTEC

Carlos, what is keeping you guys from making any of the NES line in our ZLE sizes?

? They are custom wheels. You just order the size and offset you want.

[DOHCVTEC]

Originally Posted by BradfordCamaro

? They are custom wheels. You just order the size and offset you want.

except they cant make them in ZLE sizes. feel free to give it a try and let us know how it goes for you but for me they couldn't make them

[Carlos_MRRWheelsInc]

Originally Posted by Destroyer_1LE

Not to get into an argument but I haven't meet one person that paid 80 thousand for a ZL1 1LE if so they should find a new sales men. As for spacers and hub centric rings go; they are not used to clear the calipers. They are to clear the shocks and to get correct fitment. Many race teams use spacer and hub centric rings to run wheels including supertrofeo and the new Porsche gt2rs comes with 3mm spacers from the factory. As you will know when "flow form" wheels are made they all come from the same mold then just machined down to "spec" so you only have one wheel and nothing is specific like a true forged wheels.

no argument here but check out your quote
"They are to clear the shocks and to get correct fitment."
your basically saying you need a spacer cause someone built the incorrect fitment correct??

also yes I have spoken to guys who do track and yes they mainly use spacers
for cars like the camaro that at times require higher and lower off sets for front and back and the guys want to rotate. but forged or not if your buying wheels and your not at the track why not have someone produce the wheels to the proper off sets??? thats what we do, also I never mentioned hub rings and I dont see anything wrong with rings as we use them as well but if Im making a vehicle specific wheel then it should be dedicate to such vehicle.

with this in mind we have certain wheels that yes we target the Camaro market and so we make them hub centric/ clear calipers, no spacers required, accepts OE caps etc. and yes we have our general wheels that are made for everything else but still no spacers required cause we offer
custom off sets.

[DOHCVTEC]

one more time... still curious... Carlos, what is keeping you guys from making any of the NES line in our ZLE sizes?

[DOHCVTEC]

bump for an aswer

[Carlos_MRRWheelsInc]

OK guys sorry to revive this one but is for the good of all.
we finally received our 19x12 Forged mold, Basically we are able to build a mono block forged wheel for the ZL1/1Le fitment.

We are considering one of these models.
FG09, FG-X SS1.1
or
Z28 model

any thoughts guys??

FG09

FG-X

SS1.1

[viurniel]

Originally Posted by Carlos_MRRWheelsInc

we finally received our 19x12 Forged mold, Basically we are able to build a mono block forged wheel for the ZL1/1Le fitment.

Z28 is such a nice wheel. I like the FG09 too.

[BradfordCamaro]

SS1.1

That's my pick