07-19-2020, 07:42 PM | #1 |
Drives: firebird Join Date: Jan 2010
Location: valdosta, georgia
Posts: 155
|
E85 enable efive
I bought the E85 kit from lethal garage and waiting for it. Now how to enable E85 in efilive? Under fuel tank and parameters i changed sender e85 enable from no to yes. Under flex fuel parameters i changed B0178 to yes, B0184 to sensor, B0186 to enable. Is that about it? If yes will i be all set to run e85 as the car will adjust itself? Oh 2017 camaro SS fifty
|
07-19-2020, 08:33 PM | #2 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,751
|
You’ll find everyone using HP Tuners, not EFI Live, on this forum. Not sure how much help we’ll be with EFI Live.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
07-19-2020, 09:08 PM | #3 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,799
|
One way you will know is by logging Ethanol content. If the sensor shows 10-11% on 93 pump then it's active. The next thing you will need to do is properly populate the stoich table and flex spark table, then go ahead and put E85 in it.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
07-20-2020, 06:56 AM | #4 |
Drives: firebird Join Date: Jan 2010
Location: valdosta, georgia
Posts: 155
|
So the tables are not populated correctly for e85 from factory?
|
07-20-2020, 07:48 AM | #5 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,609
|
Correct, see example from a 2018 SS (not mine) below. Also, as Josh said, you'll get much more in-depth expertise and advice here if you switch to HP Tuners.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
07-20-2020, 04:03 PM | #6 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,799
|
Correct. You need to enter the correct stoich value for each percentage of ethanol ranging from 0-100%
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
|
|
Post Reply
|
|
|