You are browsing camaro6 
09-07-2023, 09:30 AM
|
#1 |
 
Drives: 2020 2ss Join Date: Sep 2023
Location: Houston
Posts: 7
|
Brake caliper mounting torque specs - 20' SS / 2SS
The manual only mentions specs for the front caliper torque specs @ 148 ft lb (pg 161). I cannot find what the rear caliper mounting bolts need to be torqued to. If anyone has access to the specs it would be great. 2020 is different than other close year models. They are the brembo calipers that come stock on the 20' SS.
Thanks! Last edited by Keith 2020 2ss; 09-07-2023 at 12:42 PM. |
|
|
|
09-08-2023, 12:37 PM
|
#2 |
|
Drives: 19' 2SS Join Date: Jun 2022
Location: Colorado
Posts: 5
|
Fronts call for an angle torque wrench :
First Pass: 150 Nm (111 lb ft) Final Pass: 15-30 degrees Rears are straight forward : Brake Caliper Bolt (1) » Install [2x] 125 Nm (92 lb ft) It also states this for the bolts : Apply threadlocker to 2/3 of the threaded length of the caliper bolts Blue threadlocker |
|
|
|
|
09-08-2023, 12:58 PM
|
#3 |
   
Drives: 2023 2SS Convertible Join Date: May 2009
Location: Metro Detroit
Posts: 1,062
|
Wow, are those torque to yield now?
-Geoff
__________________
'12 2SS RS Convertible - Traded in.
'16 2SS Convertible - White on white, mag-ride, NPP, nav. Sold! '23 2SS Convertible -Same as above except orange. |
|
|
|
|
09-08-2023, 02:12 PM
|
#4 | |
|
Drives: 2020 2ss Join Date: Sep 2023
Location: Houston
Posts: 7
|
Quote:
Appreciate it Boost! The parts have been in my garage for 2 weeks, while I was looking for that damn spec. I saw TTY on some other year models for the front, thank you for confirming this on the 20'. I'll buy some new bolts before the pad and rotor replacement. |
|
|
|
|
|
09-08-2023, 04:03 PM
|
#5 | |
|
2020 Shadow Gray 2SS
Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019
Location: SoCal
Posts: 3,031
|
Quote:
From the service manual:
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Camaro Fender Badge, Footwell Lighting
Added after delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Sport Pedals, SS Wheel Caps, Black Lugs/Locks, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF - Full Front, SunTek 35% Tint, CeramicPro coating, RST Stainless Brake Lines, Castrol SRF, MSD Super Conductor Wires Left: My "fun" ride. Right: My "work" ride: a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph...  |
|
|
|
|
|
09-10-2023, 08:39 PM
|
#6 |
|
Drives: 2020 2ss Join Date: Sep 2023
Location: Houston
Posts: 7
|
Perfect. Thanks for that! Brakes are important.
|
|
|
|
|
03-21-2024, 07:58 PM
|
#7 |
|
Drives: 2020 2ss Join Date: Sep 2023
Location: Houston
Posts: 7
|
It's impossible to get back to 150 with floor jacks.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
