ZL1 stone/splash guards - Page 40

7LitreC5 · 03-21-2019, 11:47 AM

Thanks. I send an email.

DANACO · 03-21-2019, 10:49 PM

Installed today, very good fitment I will say, thankful for that. I did find adding a washer behind the top mounting hole helped with a better fitment, same both sides.

Cake's Z · 03-21-2019, 11:21 PM

Looks great! Is there a gap on the rear guards? Best color btw!

SHE'Z 18 · 03-22-2019, 06:33 AM

Quote:

Originally Posted by DANACO

Installed today, very good fitment I will say, thankful for that. I did find adding a washer behind the top mounting hole helped with a better fitment, same both sides.

Hi Danaco... Not to hijack this thread, but which version of the QuickJack are you using? 3500SLX, 5000SLX or the 5000EXT? Any quick thoughts / feedback with it? Only curious b/c I'm strongly considering the QJ.

Thanks...

7LitreC5 · 03-22-2019, 07:05 AM

Ordered the rears this morning...and received info about 3 hours later.

DANACO · 03-22-2019, 08:04 AM

Quote:

Originally Posted by Cake’s Z

Looks great! Is there a gap on the rear guards? Best color btw!

No gap at all, they fit snugly and perfectly, just could have been a bit wider at the bottom and mimicked the fronts more. I disagree with them that it would have looked like a truck, simply not true.

DANACO · 03-22-2019, 08:17 AM

Quote:

Originally Posted by SHE'Z 18

Hi Danaco... Not to hijack this thread, but which version of the QuickJack are you using? 3500SLX, 5000SLX or the 5000EXT? Any quick thoughts / feedback with it? Only curious b/c I'm strongly considering the QJ.

Thanks...

I have the 7k extended version, the capacity is so I can lift my Raptor and the length was actually to fit the ZL. There is only one opening to the welded body seam in the rear but two in the front, I have the Addon lift blocks placed on the second opening from the front wheels, this dimension between the front and rear lift blocks works perfectly for the longer Quick Jacks.

The pictures here show the plywood placement holders for the included rubber lift blocks, this way I never have to fiddle with that and they don’t move while lifting. I also machined polyethylene glides for the bottom rails that make sliding them very easy on the garage floor. I’ve seen some that came with small round nylon glides that are poor at best, mine came with nothing and moving them was very difficult and made a mess of the bottom rails. I sold a guy here on the forum a set of the glides, if enough people were interested I’d make more of them.

These Jacks are very well made, they weigh over 100lbs each so the glides are essential and they work really well, I don’t have the height for a post lift and they’re pretty pricey as well, a bit over my budget.

SHE'Z 18 · 03-22-2019, 09:51 AM

Fantastic! I appreciate the feedback. It has nearly the same dimensions as the 5000SLX version, which is the one that I'm considering. Much like you, I'm short on having enought room for a 4-post lift, which would've been awesome to have. Also, that's a great idea for the graphite sliders. If I end up getting one of these, I may be reaching out to you shortly after. Okay, enough hijacking the thread. Back to the topic..

Thanks again...

meSSohappy · 03-22-2019, 11:44 AM

Quote:

Originally Posted by DANACO

No gap at all, they fit snugly and perfectly, just could have been a bit wider at the bottom and mimicked the fronts more. I disagree with them that it would have looked like a truck, simply not true.

Agreed...a bit wider would be nice.

meSSohappy · 03-22-2019, 11:46 AM

Quote:

Originally Posted by 7LitreC5

Ordered the rears this morning...and received info about 3 hours later.

NB2017ZL1 · 03-22-2019, 06:02 PM

Quote:

Originally Posted by DANACO

Installed today, very good fitment I will say, thankful for that. I did find adding a washer behind the top mounting hole helped with a better fitment, same both sides.

Looks great

OVERPAR73 · 03-23-2019, 11:10 AM

I was just about to order today, what happen to the $20 discount with our name being on the original list? My car has been in hibernation and finally got it out yesterday for a short drive!

RandRZL1 · 03-23-2019, 11:32 AM

Ordered mine last night, order confirmed! Less $20. discount!

meSSohappy · 03-23-2019, 11:35 AM

Quote:

Originally Posted by OVERPAR73

I was just about to order today, what happen to the $20 discount with our name being on the original list? My car has been in hibernation and finally got it out yesterday for a short drive!

Did u pre order the fronts and get $20 discount? If so, contact ACS for additional discount on rears.
If not, use code messoflaps for $20 discount on set of 4, until April 1.

03-21-2019, 10:49 PM	#548
DANACO Drives: 18 ZL1 Join Date: May 2018 Location: Denver Posts: 220 View My Garage	Installed today, very good fitment I will say, thankful for that. I did find adding a washer behind the top mounting hole helped with a better fitment, same both sides. Attached Images

03-21-2019, 11:21 PM	#549
Cake's Z Drives: 2018 ZL1 Join Date: Dec 2018 Location: OV California Posts: 92	Looks great! Is there a gap on the rear guards? Best color btw! __________________ 2018 A10 ZL1 2020 Can Am X3 XRS turbo RR 2019 TRD PRO Tundra (wifes) 2015 TRD Tundra (traded) 2014 Subaru WRX (traded) 2000 Z28 (sold) 1970 GMC 1500 (stolen) 2017 YXZ1000 (sold)

03-22-2019, 07:05 AM	#551
7LitreC5 Drives: 18 Tahoe RST, 19 Z06 Join Date: Apr 2017 Location: Colorado Springs, CO Posts: 327	Ordered the rears this morning...and received info about 3 hours later. Last edited by 7LitreC5; 03-22-2019 at 10:23 AM.

03-23-2019, 11:10 AM	#558
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,471 View My Garage	I was just about to order today, what happen to the $20 discount with our name being on the original list? My car has been in hibernation and finally got it out yesterday for a short drive! __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

03-21-2019, 11:47 AM	#547
7LitreC5 Drives: 18 Tahoe RST, 19 Z06 Join Date: Apr 2017 Location: Colorado Springs, CO Posts: 327	Thanks. I send an email.

03-22-2019, 09:51 AM	#554
SHE'Z 18 Drives: 18 ZL1 - M6 Join Date: Mar 2019 Location: MI Posts: 440	Fantastic! I appreciate the feedback. It has nearly the same dimensions as the 5000SLX version, which is the one that I'm considering. Much like you, I'm short on having enought room for a 4-post lift, which would've been awesome to have. Also, that's a great idea for the graphite sliders. If I end up getting one of these, I may be reaching out to you shortly after. Okay, enough hijacking the thread. Back to the topic.. Thanks again...

03-23-2019, 11:32 AM	#559
RandRZL1 Drives: 2018 ZL1 Join Date: Dec 2017 Location: Western Washington Posts: 150	Ordered mine last night, order confirmed! Less $20. discount!

User Name		Remember Me?
Password