11-30-2020, 05:31 PM | #1 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
Factory exhaust slip fit?
Just curious, after the secondary cat section on the OEM ZL1 exhaust for 17+, are those round "connectors" just a slip fit? Wasnt sure how they disconnect/reconnect and not leak etc. Didnt see any clamps. Thanks in advance!
Pic for reference. |
12-01-2020, 06:54 AM | #2 |
Drives: R.I.P. 2021 ZL1 & 2019 Rd Garn 2SS Join Date: Dec 2019
Location: Chattanooga, TN
Posts: 268
|
Those are flex joints. It lets the exhaust move freely.
|
12-01-2020, 08:59 AM | #3 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
No real connection points on these cars. It's kind of like the wild west with all these different exhaust systems.
|
12-01-2020, 09:19 AM | #4 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: Gapplebees
Posts: 3,081
|
|
12-02-2020, 09:21 AM | #5 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
Thanks all! I may cut the pipes after the flex sections and before the x pipe and weld in some Vibrant resonators. Cutting down a bit of rasp with the muffler delete is all. Anyone done this before?
|
|
|
Post Reply
|
|
|