04-12-2018, 06:27 PM | #1 |
Drives: 2019 ZL1-1LE A10 Join Date: Jan 2017
Location: Oklahoma
Posts: 512
|
How to protect Exposed carbon hood insert
What is the best way to protect the Carbon weave hood insert? I know it scratched easily and you are not supposed to wax it. Would it be better to Expel wrap it or ceramic coat it? Who has done done one of these options? Thanks!
__________________
19 ZL1-1LE A10
|
04-12-2018, 06:40 PM | #2 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
Can’t wax it? The owners manual is incorrect. Wax, Seal, Ceramic and XPEL to your hearts content.
From Glen E: “It comes from dealers using the poly glycoat type coatings of the 80s and 90s that didn't work very well and GM had a problem. You can seal/wax the carbon fiber all you want, what you shouldn't do is use a cleaner wax or a very strong rubbing compound/polish, just wipe it down with alcohol/water and put on your favorite sealant or wax.” |
04-12-2018, 06:43 PM | #3 |
Drives: 2017 BLACK ZL1 A10 Join Date: Jan 2018
Location: Chicago
Posts: 109
|
I had mine Expel'd.
Cant even tell it's on. Mine is Black as well.
__________________
'17 Mosaic ZL1 Katech TB, Plugs/Wires, Rotofab Oiled,+18% Lower, 2" Headers, Cat Delete, 93 Tune, Mobil 1, IPA FF04, 315/30/20 r888r, 664hp/693tq (93), 702hp/727tq (100 oct)
|
04-12-2018, 06:44 PM | #4 |
Drives: 2019 ZL1-1LE A10 Join Date: Jan 2017
Location: Oklahoma
Posts: 512
|
Yes. It specifically says on page 41 of the HP Supplement not to wax it.
__________________
19 ZL1-1LE A10
|
04-12-2018, 06:45 PM | #5 |
Drives: 2019 ZL1-1LE A10 Join Date: Jan 2017
Location: Oklahoma
Posts: 512
|
Curious what they did around the ZL1 Emblem?
__________________
19 ZL1-1LE A10
|
04-12-2018, 06:50 PM | #6 |
Drives: 2017 BLACK ZL1 A10 Join Date: Jan 2018
Location: Chicago
Posts: 109
|
My Expel installer has the plotter to make the cuts.
This particular piece had cut outs for the emblems.
__________________
'17 Mosaic ZL1 Katech TB, Plugs/Wires, Rotofab Oiled,+18% Lower, 2" Headers, Cat Delete, 93 Tune, Mobil 1, IPA FF04, 315/30/20 r888r, 664hp/693tq (93), 702hp/727tq (100 oct)
|
04-12-2018, 07:09 PM | #7 |
Drives: Crush ZLE M6 | 2000 Corvette FRC Join Date: Jun 2010
Location: Cencal
Posts: 1,659
|
Polished mine by hand with Essence, and ceramic coated it. No issues, looks amazing.
|
04-12-2018, 07:15 PM | #8 |
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 4,975
|
|
04-12-2018, 07:32 PM | #9 |
Coupe Newbie
Drives: 2017 ZL1, 2021 Corvette Convertible Join Date: Jul 2011
Location: Columbus, Ohio
Posts: 3,283
|
Mine is covered with Suntek film. Installer removed the ZL1 emblems and applied new ones over the film.
__________________
|
04-12-2018, 07:41 PM | #10 |
Drives: 2012 Porsche 911 Turbo S Join Date: Jan 2017
Location: Los Angeles, CA
Posts: 1,776
|
I don't know why you couldn't wax it, it's clear coated. I have mine wrapped with ppf
__________________
IG: 2fast2nick
-- Current -- 2012 Porsche Turbo S - PDK - Basalt Black Metallic -- Past -- 2017 Camaro ZL1 Coupe - Red Hot - A10, PDR - HRE P101 2015 Mustang GT PP - Whipple Supercharger |
04-12-2018, 07:43 PM | #11 |
Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
__________________
2018 ZL1 1LE sw/PDR
|
04-12-2018, 08:59 PM | #12 |
Drives: 2017 ZL1 A10 Vert Join Date: Jan 2018
Location: Texas
Posts: 56
|
Mine is ceramic coated. Looks amazing and cleans up easily.
|
04-12-2018, 11:33 PM | #13 |
Drives: ZL1 Join Date: Jun 2012
Location: USA
Posts: 288
|
I agree.
__________________
2018 ZL1 Vert
2018 Dodge Demon |
04-13-2018, 12:10 AM | #14 |
Had mine covered in LLUMAR PPF as well.
|
|
|
|
Post Reply
|
|
|