[jmackisback]

Originally Posted by Hellrzr

Bump for info on this dilemma. Us Convertible guys will need a solution that does not involve the sharkfin camera as it would be partially or wholly obscured by either the spoiler or the stanchion.
I have a couple of spoilers on the way and an after market camera to see if i can fit it. Otherwise I'll have to cut the factory Camera out of the stock spoiler and fit it in whichever one I decide to run. Will report on the outcome

[scottcolem]

if you flip the spoiler over there is an access panel to remove the camera. i removed the camera and am waiting on a solution, possibly a 20 sharkfin. i was not a fan of the zl1 spoiler

[LT4Supercharged]

Any solution to a fix on 2019 models with 2 rear cameras yet. I ordered my 1LE wing from C7Carbon and am looking for a fix.

[NEGXXIS]

Originally Posted by LT4Supercharged

Any solution to a fix on 2019 models with 2 rear cameras yet. I ordered my 1LE wing from C7Carbon and am looking for a fix.

I pulled the camera out of my stock 2019 spolier a few months ago when i installed my anderson wing. was going to drill and put it in the anderson wing, but i decided that I might like it better as a front camera.
Just havent had the time to disassemble the entire interior to reroute the camera wiring to the front of the car.

[Chutzpah]

Originally Posted by NEGXXIS

I pulled the camera out of my stock 2019 spolier a few months ago when i installed my anderson wing. was going to drill and put it in the anderson wing, but i decided that I might like it better as a front camera.
Just havent had the time to disassemble the entire interior to reroute the camera wiring to the front of the car.

Would you mind posting a picture of the camera (trying to figure out what I’m going to do with my spoiler too) I think moving the camera to the front is a good thought... any ideas on what the harness costs?

[Oramac2016]

Can any of you guys tell me the part# on the camera? Also, its just a cable for the camera. not really a harness. It may cost $100 or less for a cable to reroute the camera.

[NEGXXIS]

Originally Posted by Chutzpah

Would you mind posting a picture of the camera (trying to figure out what I’m going to do with my spoiler too) I think moving the camera to the front is a good thought... any ideas on what the harness costs?

Originally Posted by Oramac2016

Can any of you guys tell me the part# on the camera? Also, its just a cable for the camera. not really a harness. It may cost $100 or less for a cable to reroute the camera.

I will try to get you guys the info this weekend.

[A-A-RON]

Originally Posted by NEGXXIS

I pulled the camera out of my stock 2019 spolier a few months ago when i installed my anderson wing. was going to drill and put it in the anderson wing, but i decided that I might like it better as a front camera.
Just havent had the time to disassemble the entire interior to reroute the camera wiring to the front of the car.

Exactly what I was thinking about doing since we dont have a front splitter/proximity camera like the Corvettes.

👍

[NEGXXIS]

Sorry the pics suck, i thought they took better than that.

Let me know if I need to try again.

[Oramac2016]

Originally Posted by NEGXXIS

Sorry the pics suck, i thought they took better than that.

Let me know if I need to try again.

cant really make the part# out. Think its starting with 845....

[NEGXXIS]

Originally Posted by Oramac2016

cant really make the part# out. Think its starting with 845....

I will get better pics

[Oramac2016]

part# 84510978 thanks. Hellrzr sent me some good pics as well. Thanks to both of you. I figured I could find this on some parts websites. Guess not. Is that maybe because it only is sold together with that spoiler?

[NEGXXIS]

Glad you got the part number , here is the better pic for anyone else looking

[NEGXXIS]

Have you guys seen this?
A whole rear 2019 rear spoiler with camera.

https://www.ebay.com/itm/2019-2020-C...53.m1438.l2649