Lift pads

pablo0526 · 06-10-2022, 10:30 AM

Hello, I am planning on getting lift pads for my 2019 SS a since i dont really trust the pinch welds, if anyone has a link to the best ones that would be appreciated.

Val Walkinshaw · 06-10-2022, 10:37 AM

I've bought 2 sets. One off Amazon for $58 and one off ZL1 ADD ONS FOR $90. There is zero difference between the two.

Dewhel Lift pads Jack Pad Billet Anodized Red Aluminum Floor Jack bolt on Jack Points For 6th gen Camaro 16-18,except convertable https://a.co/d/729LWk8

https://zl1addons.com/products/camaro-bolton-lift-pads

I used the ZL1 ADD ONS 4 on both the front and rear jack points. I used the Dewhel on the middle jack point behind the A pillar.

pablo0526 · 06-10-2022, 11:48 AM

Quote:

Originally Posted by Val Walkinshaw

I've bought 2 sets. One off Amazon for $58 and one off ZL1 ADD ONS FOR $90. There is zero difference between the two.

Dewhel Lift pads Jack Pad Billet Anodized Red Aluminum Floor Jack bolt on Jack Points For 6th gen Camaro 16-18,except convertable https://a.co/d/729LWk8

https://zl1addons.com/products/camaro-bolton-lift-pads

I used the ZL1 ADD ONS 4 on both the front and rear jack points. I used the Dewhel on the middle jack point behind the A pillar.

Thank you!

ember1205 · 06-11-2022, 08:22 AM

I have these: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I have the ZL1 Add-Ons rock guards and, while they're ok, I was pretty disappointed in their cost plus customer service. There seems to be similar sentiments about them as a company from some others as well.

SatinSteel · 06-11-2022, 01:17 PM

I bought 2 sets off flea bay so I had 6 lift points. They were $40 a set. Work like a charm so far!

ember1205 · 06-11-2022, 01:24 PM

Quote:

Originally Posted by SatinSteel

I bought 2 sets off flea bay so I had 6 lift points. They were $40 a set. Work like a charm so far!

Curious as to why you did this? Convertibles don't have the "middle" ones accessible due to the cross braces, and they're really only useful if you're trying to lift the car so that both the front and rear wheels come up on the same side when jacking from one point. Seems like it isn't an overly useful thing with a staggered wheel setup?

goata8 · 06-11-2022, 07:33 PM

i bought a 4 pack off amazon that came with the hockey puck with a slot cut in it style for the jack, and the ones that fit on the jackstands two. works great well see how long they last.

SATXjjuussttiinn · 06-12-2022, 03:26 PM

I got mine from ZL1 Addons

https://zl1addons.com/collections/ca...lton-lift-pads

dpevans · 06-12-2022, 03:53 PM

agree ZL1 add ons. For the rear of the car I use the lift point on the rear cradle then use jack stands under the pinch points with the add ons.

robertd33 · 06-22-2022, 06:22 PM

these are still working great for me
https://www.camaro6.com/forums/showp...postcount=8786

Gen6cyl · 06-22-2022, 06:36 PM

Quote:

Originally Posted by robertd33

these are still working great for me
https://www.camaro6.com/forums/showp...postcount=8786

They look like the ones I got last week.I paid about $58 . Have not put on yet.

bef18ZL1 · 06-22-2022, 10:30 PM

I got the ones off Amazon for $50+ like others. Seem to be like the more expensive ones. I'm not mechanical and got them on. Not sure if in right spot, but yeah lol

Spaceme1117 · 06-23-2022, 07:13 AM

I purchased the bolt on ones from Amazon. They are still on the car after several thousand miles. Just need to make sure to use some LocTite to make sure the set screws don't come loose.

06-10-2022, 10:30 AM	#1
pablo0526 Drives: 19 CAMARO SS Join Date: Apr 2022 Location: Florida Posts: 13	Lift pads Hello, I am planning on getting lift pads for my 2019 SS a since i dont really trust the pinch welds, if anyone has a link to the best ones that would be appreciated.

06-10-2022, 10:37 AM	#2
Val Walkinshaw L8ap3x Drives: 2018 2SS 1LE Join Date: Jun 2018 Location: SE MI/ NW OH Posts: 426 View My Garage	I've bought 2 sets. One off Amazon for $58 and one off ZL1 ADD ONS FOR $90. There is zero difference between the two. Dewhel Lift pads Jack Pad Billet Anodized Red Aluminum Floor Jack bolt on Jack Points For 6th gen Camaro 16-18,except convertable https://a.co/d/729LWk8 https://zl1addons.com/products/camaro-bolton-lift-pads I used the ZL1 ADD ONS 4 on both the front and rear jack points. I used the Dewhel on the middle jack point behind the A pillar.

06-11-2022, 08:22 AM	#4
ember1205 Hot Camaro Drives: '20 2SS Convertible 6MT Join Date: May 2020 Location: CT Posts: 3,534	I have these: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 I have the ZL1 Add-Ons rock guards and, while they're ok, I was pretty disappointed in their cost plus customer service. There seems to be similar sentiments about them as a company from some others as well.

06-11-2022, 01:17 PM	#5
SatinSteel Drives: 2022 Camaro SS, F350 platinum Join Date: Jan 2022 Location: PA Posts: 22	I bought 2 sets off flea bay so I had 6 lift points. They were $40 a set. Work like a charm so far!

06-11-2022, 07:33 PM	#7
goata8 Drives: 2023 LT1 A10 Join Date: May 2017 Location: Palma Sola, FL Posts: 141	i bought a 4 pack off amazon that came with the hockey puck with a slot cut in it style for the jack, and the ones that fit on the jackstands two. works great well see how long they last.

06-12-2022, 03:26 PM	#8
SATXjjuussttiinn Drives: 2010 Camaro 1LT Join Date: Apr 2022 Location: Texas Posts: 48	I got mine from ZL1 Addons https://zl1addons.com/collections/ca...lton-lift-pads

06-12-2022, 03:53 PM	#9
dpevans Drives: 2024 Riverside Blue 2SS 1LE Join Date: Mar 2016 Location: Fort Wayne, IN Posts: 1,206	agree ZL1 add ons. For the rear of the car I use the lift point on the rear cradle then use jack stands under the pinch points with the add ons.

06-22-2022, 06:22 PM	#10
robertd33 Drives: 2018 2ss redline Join Date: Sep 2019 Location: west plains MO Posts: 63	these are still working great for me https://www.camaro6.com/forums/showp...postcount=8786

06-22-2022, 10:30 PM	#12
bef18ZL1 Drives: 2018 Camaro ZL1 1LE Join Date: May 2022 Location: Midwest Posts: 41	I got the ones off Amazon for $50+ like others. Seem to be like the more expensive ones. I'm not mechanical and got them on. Not sure if in right spot, but yeah lol

06-23-2022, 07:13 AM	#13
Spaceme1117 Drives: 2017 Camaro SS, 2011 Corvette GS Join Date: Feb 2019 Location: Erlanger, Kentucky 41018 Posts: 815	I purchased the bolt on ones from Amazon. They are still on the car after several thousand miles. Just need to make sure to use some LocTite to make sure the set screws don't come loose.

User Name		Remember Me?
Password