Ever wanted orange belts in your FIFTY or swap seatbelts in general

teddyca · 04-13-2022, 06:26 PM

So my car is obviously the FIFTY with the orange stitching and such. I always wanted colored belts so I started researching and found the "hot wheels" edition came with orange belts. I couldn't confirm if it would match or not and I am here to say its perfect. Now with that said it MIGHT be alittle loud for me I shall see but I did it and it isnt bad. Here is what I can confirm for those looking for Orange. last 3 849 is driver side and 852 is pass. I went to gmpartsdirect and outside a bit of a wait they were by far the cheapest. Now lets get on to the install. Go to youtube and you'll find a bunch of videos. Heres what I can tell you.
-Removing back bottom cushion the first time is a real bitch. I am a pretty strong guy and in an effort to not damage the seat I used a big ass screw driver at the connectors
-You dont need to remove the sticky weather stripping. Leave it
-If your front seat is high (us short guys) lower it to access the 10mm on the seat
-If doing fronts only no need to remove back panels
-When removing the lower T50 behind the panel pull up the plastic wiring harness and go under it
-7mm behind top airbag panel

Overall took about 30 min to do driver side and about 15 to do pass after I learned my lessons. And yes my seats recline ALL THE WAY BACK

I pulled them and drilled out the stoppers lol.

LT4Greg · 04-13-2022, 07:44 PM

Not really because my 2017 ZL1 has the red seat/shoulder belts which I’m happy with. I applaud you though for changing yours to the orange ones!��

mrgoodwrench · 04-13-2022, 09:06 PM

I like those - I have the 2020 Orange and would like to put these in mine...thx for the part numbers!

Hotwheeltat · 04-14-2022, 07:06 AM

Quote:

Originally Posted by mrgoodwrench

I like those - I have the 2020 Orange and would like to put these in mine...thx for the part numbers!

Don't go by those part numbers for a convertible. they are not the same as a coupe.

Crushin_LT1 · 04-14-2022, 07:16 AM

Quote:

Originally Posted by mrgoodwrench

I like those - I have the 2020 Orange and would like to put these in mine...thx for the part numbers!

I might have to do the same... orange crush is beautiful and the matching orange seatbelts....

1badtie · 04-14-2022, 08:07 AM

That looks really good. Makes the interior really pop. Good Job

TXCSSU · 04-14-2022, 01:05 PM

I just got the red kneepad sections. I thought about the seatbelts but when I saw pictures of people using them, it looked like they were wearing construction vests.

frankcam6 · 04-14-2022, 08:29 PM

Ops part numbers are for orange. Anyone know what red's are?? THX

arpad_m · 04-14-2022, 09:50 PM

Quote:

Originally Posted by frankcam6

Ops part numbers are for orange. Anyone know what red's are?? THX

For the coupe, they're 84496840 (front left), 84496831 (front right), 84880720 (rear left), 84880724 (rear right).

Bumbleboy92 · 04-15-2022, 12:22 AM

Quote:

Originally Posted by mrgoodwrench

I like those - I have the 2020 Orange and would like to put these in mine...thx for the part numbers!

The Hot Wheels package came in the same Orange color code as your car back in 2017 so this is probably the exact match for you!

teddyca · 04-15-2022, 04:24 PM

Quote:

Originally Posted by Hotwheeltat

Don't go by those part numbers for a convertible. they are not the same as a coupe.

Pretty sure your wrong my friend. I BELIEVE the rears are different for the 2 but the fronts are the same. I know that knowledge is somewhere here so you guys research. Those numbers are 100% Coupe front

frankcam6 · 04-15-2022, 06:21 PM

Quote:

Originally Posted by arpad_m

For the coupe, they're 84496840 (front left), 84496831 (front right), 84880720 (rear left), 84880724 (rear right).

thank-you perfect!!!

Hotwheeltat · 04-16-2022, 02:22 PM

Quote:

Originally Posted by teddyca

Pretty sure your wrong my friend. I BELIEVE the rears are different for the 2 but the fronts are the same. I know that knowledge is somewhere here so you guys research. Those numbers are 100% Coupe front

84496837-RF convertible red
84496831-RF coupe red
While these are not the orange 50 belts, the coupe and convertible most definitely are not the same part numbers. Maybe someone should do some better research.

teddyca · 04-17-2022, 12:46 PM

Keep it simple guys. Do what I did. Find a car online with the belts of your choice for sale. Take the vin and have dealer. pull part numbers.

IF YOU WANT ORANGE AND HAVE A COUPE I GOT YOU.

04-13-2022, 06:26 PM	#1
teddyca Drives: Blown C7 and 6th gen Join Date: Aug 2012 Location: NorCal Posts: 410	Ever wanted orange belts in your FIFTY or swap seatbelts in general So my car is obviously the FIFTY with the orange stitching and such. I always wanted colored belts so I started researching and found the "hot wheels" edition came with orange belts. I couldn't confirm if it would match or not and I am here to say its perfect. Now with that said it MIGHT be alittle loud for me I shall see but I did it and it isnt bad. Here is what I can confirm for those looking for Orange. last 3 849 is driver side and 852 is pass. I went to gmpartsdirect and outside a bit of a wait they were by far the cheapest. Now lets get on to the install. Go to youtube and you'll find a bunch of videos. Heres what I can tell you. -Removing back bottom cushion the first time is a real bitch. I am a pretty strong guy and in an effort to not damage the seat I used a big ass screw driver at the connectors -You dont need to remove the sticky weather stripping. Leave it -If your front seat is high (us short guys) lower it to access the 10mm on the seat -If doing fronts only no need to remove back panels -When removing the lower T50 behind the panel pull up the plastic wiring harness and go under it -7mm behind top airbag panel Overall took about 30 min to do driver side and about 15 to do pass after I learned my lessons. And yes my seats recline ALL THE WAY BACK I pulled them and drilled out the stoppers lol. Attached Images __________________ 14 Corvette Z51 Coupe - 655RWHP A&A Ti Blower, Alky Control Meth kit, Kooks LT setup, Corsa Catback, Full APR CF kit, RK Sports CF hood, hell CF everything LOL 17 Camaro 2SS 50th edition. TOTALED 6/2019 K&N Intake, MRBP axleback, Eibach kit, 20" Z28 wheels, smoked lights all the way around, Rockford Fosgate system 17 Camaro 2SS 50th edition. Round 2- 8/2019 550/600 RWHP, Magnuson TVS2300, Rotofab Intake, Corsa Xtreme, Air Lift P3 System, 20" Stance SF-07, smoked lights all the way around, Rockford Fosgate system.

04-13-2022, 07:44 PM	#2
LT4Greg Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016 Location: Georgia Posts: 5,813	Not really because my 2017 ZL1 has the red seat/shoulder belts which I’m happy with. I applaud you though for changing yours to the orange ones!�� __________________ ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.

04-13-2022, 09:06 PM	#3
mrgoodwrench The Wicked Jester Drives: 2020 Camaro 2SS Orange Crush Vert Join Date: Sep 2012 Location: Orange County, NY Posts: 87 View My Garage	I like those - I have the 2020 Orange and would like to put these in mine...thx for the part numbers! __________________ New Car (His): 2020 Camaro Orange Crush Convertible 2SS New Car (Hers): 2020 Camaro Satin Steel Metallic Convertible 2LT/RS Redline Package Old Car: 2014 Camaro Summit White 2SS/RS Old Car: 2010 Camaro Inferno Orange 2LT/RS

04-14-2022, 08:07 AM	#6
1badtie Drives: 2018 Camaro ZL1 Join Date: Nov 2009 Location: Central Arkansas Posts: 1,214	That looks really good. Makes the interior really pop. Good Job __________________ 2018 ZL1 M6 NGM PPF and Ceramic coating IG: NGMZL1 2010 2SS RS --- SOLD MODS- Performance: BMR trailing arms & bushings \| BMR Toe links \| X-pipe \| Muffler delete \| Vmax ported throttle body \| Apex "strong" MAS \| Vararam CAI \| Apex catch can \| Kooks Headers \| Kooks HF Cats \| Dyno tuned by GPI 417 RWHP 409 FT-Lb Cosmetic: painted Zl1 rockers \| Zl1 grill \| AAC side markers \| AAC LED backup lights \| windows tint \| taillight tint \| JDP tow hook \| all emblems blacked out \| LED fogs

04-14-2022, 01:05 PM	#7
TXCSSU Account Suspended Drives: 2022 ZL1 M6/Nissan Leaf Join Date: May 2016 Location: Dallas Posts: 1,138	I just got the red kneepad sections. I thought about the seatbelts but when I saw pictures of people using them, it looked like they were wearing construction vests.

04-14-2022, 08:29 PM	#8
frankcam6 Drives: 2022 1SS 1LE RB Join Date: Mar 2021 Location: Edmonton Posts: 57	Ops part numbers are for orange. Anyone know what red's are?? THX

04-17-2022, 12:46 PM	#14
teddyca Drives: Blown C7 and 6th gen Join Date: Aug 2012 Location: NorCal Posts: 410	Keep it simple guys. Do what I did. Find a car online with the belts of your choice for sale. Take the vin and have dealer. pull part numbers. IF YOU WANT ORANGE AND HAVE A COUPE I GOT YOU.

User Name		Remember Me?
Password