[Camaro fanboy]

:

Originally Posted by EvenStephen222

Added some white trim to my interior. Think it came out pretty good!

looks amazing

[adamjwilson]

Originally Posted by rst08tierney

was your trunk lid re-sprayed or is that just how factory peel shows on riverside?

How do you like the Corsa and which one did you go with? Looking for that to me one of my first mods with long tubes.

Just factory sprayed- all new cars will show some peel regardless of color with the right light conditions from factory- car is new with ~700 miles on it. I went with the #14789BLK Corsa NPP axle back- not much sound difference from stock suitcase with LT headers, x-pipe and high flow cats. Will probably sound better when new cam is installed soon.

[RamAir02]

Continuing to prep for track season. Did a full Castrol SRF brake flush & installed SPL Toe Arms w/ eccentric lockout this morning.

[JTS]

Originally Posted by RamAir02

Continuing to prep for track season. Did a full Castrol SRF brake flush & installed SPL Toe Arms w/ eccentric lockout this morning.

Nice , enjoy your fun at the track.

[ParisTNDude]

Originally Posted by darkfader

I got up this morning and set out to clean this thing up from its transport to the dealer. I removed all of the protective plastic from the interior, and cleaned all the sticker goo off of windows, rinsed it down and applied iron remover and then shampooed with graphene wash and then graphene detail spray.

With 60 degree temps and blue skies, I couldn’t resist putting a few more break-in miles on it. I’m happy with my choice of Sharkskin Metallic. I also made a keychain from a matchbox-style car I found on eBay. It’s a ZL1, but that was the closest to my car I could find.

Did you lower the front of your car. iT Looks awesome!

Jerry

[willzilla]

Finished up installing the Anderson Composites carbon fiber ZL1 diffuser:



Fitment is... decent. Def could use a slightly longer mold on the edges and move up the holes where the arms/braces screw into the center of the diffuser underneath.

[sactownbwoy]

Added the TruFiber canards. Later, I'll do the front splitter.

[willzilla]

Originally Posted by sactownbwoy

Added the TruFiber canards. Later, I'll do the front splitter.

Awesome! Looks good! I just installed the Trufiber canards a week or two ago and the Anderson Composites ZL1 1LE carbon fiber front splitter last week

[22SS1LE]

debaged the rear and Order an intake from Phastek

[clg82]

Originally Posted by willzilla

Awesome! Looks good! I just installed the Trufiber canards a week or two ago and the Anderson Composites ZL1 1LE carbon fiber front splitter last week

You were finally able to get them in? Weren't you having trouble getting them to fit? How did you finally get them to work?

[willzilla]

Originally Posted by clg82

You were finally able to get them in? Weren't you having trouble getting them to fit? How did you finally get them to work?

Canards fit great.. I had issues trying to get the bezels to clip in so ended up picking up the OEM zl1 1le bezels and used those instead, lol.

[sactownbwoy]

I came across your post about the difficulty in doing the bezels and that is the reason I stuck with the OEM ones and just went with the canards

Originally Posted by willzilla

Canards fit great.. I had issues trying to get the bezels to clip in so ended up picking up the OEM zl1 1le bezels and used those instead, lol.

[willzilla]

Originally Posted by sactownbwoy

I came across your post about the difficulty in doing the bezels and that is the reason I stuck with the OEM ones and just went with the canards

Lol, probably for the best. I was straight up bear hugging the dang bumper and even somewhat injured my shoulder trying to get the dang thing to clip in, haha. After like 3 days of messing with it I called it quits. It MAY have went better with a nice bumper stand like I picked up a few days later but still I was just done messing with it haha.

[Jus Cruisin]

Absolutely nothing... Just going to hunker down and let the ice storm do what it's going to do.