07-30-2021, 02:32 PM | #1 |
Drives: 2016 Camaro SS Join Date: Jan 2019
Location: Florida
Posts: 305
|
FS: Front 6-Piston Rotor Discs (<--SOLD) + Rear SS Calipers
About 17k miles on the discs when removed, never turned or tracked with. Discs only, no hats or hardware. Come from the upgraded SS 6-piston front brake kit. They'll fit the SS 1LE brakes as well, but not ZL1. Pickup, or will work out a deal for shipping as they're very heavy.
***SOLD*** Stock Camaro SS rear calipers, swapped out for the oem red calipers at about 9k miles. No hardware included. $100 shipped
__________________
2016 Gloss Black Camaro 1SS, A8, MRC, 6-Piston BBK
Whipple, LT4 fueling, AlkyControl, Kooks, Borla, Roto Fab, Mightymouse, aFe, Apex, C7 Carbon, etc... Last edited by Dagstar; 08-02-2021 at 06:12 AM. |
07-30-2021, 02:55 PM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
what front rotors did you upgrade to?
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
07-30-2021, 03:04 PM | #3 |
Drives: 2016 Camaro SS Join Date: Jan 2019
Location: Florida
Posts: 305
|
DBA T3 5000, not really an upgrade, but way cheaper than OEM discs. $3xx each vs $5xx each at the time, and also at the time I think I could only find 1LE discs, not the upgrade kit ones. I believe I changed them just to save myself the downtime.
DBA52770.1LS DBA52770.1RS
__________________
2016 Gloss Black Camaro 1SS, A8, MRC, 6-Piston BBK
Whipple, LT4 fueling, AlkyControl, Kooks, Borla, Roto Fab, Mightymouse, aFe, Apex, C7 Carbon, etc... |
07-30-2021, 03:59 PM | #4 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Do you have a PN and outer diameter measurement 370mm’ish???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-30-2021, 04:16 PM | #5 |
Drives: 2016 Camaro SS Join Date: Jan 2019
Location: Florida
Posts: 305
|
PM sent.
__________________
2016 Gloss Black Camaro 1SS, A8, MRC, 6-Piston BBK
Whipple, LT4 fueling, AlkyControl, Kooks, Borla, Roto Fab, Mightymouse, aFe, Apex, C7 Carbon, etc... |
08-10-2021, 01:11 PM | #6 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
These rotors worked like a champ on my 5th Gen ZL1 setup!!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
08-10-2021, 01:18 PM | #7 |
Drives: 2016 Camaro SS Join Date: Jan 2019
Location: Florida
Posts: 305
|
Awesome, enjoy!
__________________
2016 Gloss Black Camaro 1SS, A8, MRC, 6-Piston BBK
Whipple, LT4 fueling, AlkyControl, Kooks, Borla, Roto Fab, Mightymouse, aFe, Apex, C7 Carbon, etc... |
08-10-2021, 06:46 PM | #8 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Rotors
Wish I could find the rears to match.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
Post Reply
|
|
|