10-18-2017, 05:35 PM | #1 |
Drives: 21 LT1 RS M6 in SSM Join Date: Jul 2009
Location: Dupont, WA
Posts: 454
|
Oil catch can install: PCV valve tubing
I want to install an oil catch can, but I am reluctant to cut apart the factory rigid line between the valve and the insert into the plenum. It is covered by a plastic "loom" material and appears to be seamless (or permanently connected) from one end to the other. The valve end has a lock clip for the valve tip and the other end appears to become the insert for the plenum.
Can I get a replacement one to chop up and use for the catch can install? I don't see it at Rock Auto. Can someone provide a part or assembly number so I can try to find/order one? Thanks! Rob |
10-18-2017, 07:05 PM | #2 |
Drives: 2015 Z/22 Join Date: Aug 2015
Location: Ontario, Canada
Posts: 931
|
Think this is what you need (part no. 12616915): https://www.wholesalegmpartsonline.c.../12616915.html
I also bought a second tube to install my catch can since I'm still under warranty; here it is for the LFX engine (part no. 12638437): https://www.wholesalegmpartsonline.c.../12638437.html
__________________
Overkill/Self Tuned; Mace Camshafts; K&N Typhoon Cold Air Intake; Ported 80mm Throttle Body/Intake Manifolds/Manifold Spacer; Solo Performance High-Flow Cats, Cat-back Exhaust; Vitesse Motorsports Throttle Controller; Elite Engineering E2 Catch Can; BC Racing BR Coilovers; JPSS Delrin Radius Rod Bushing Inserts, Sway Bars; Pegasus Aluminum Rear Cradle Bushings, Camber/Caster Plates; Z/28 Toe Links, Trailing Arms, Upper Control Arm Bushings, Rear Shock Mounts
|
10-19-2017, 11:37 AM | #3 |
Drives: 21 LT1 RS M6 in SSM Join Date: Jul 2009
Location: Dupont, WA
Posts: 454
|
Great info! That looks like the creature. Thank you very much!
Rob |
|
|
|
|