Hero Smoked Rear Reflectors at Phastek Performance!!!! - Page 3

Ricardo@Phastek · 08-13-2018, 03:17 PM

Quote:

Originally Posted by mlee

This mod is a slam dunk. Sure hope they fit the 19 ZL1 since the rear difuser didn't change.

Bring yours by when you get it and lets find out!

Thank you,
Ricardo

*mlee* · 08-13-2018, 03:47 PM

Quote:

Originally Posted by Ricardo@Phastek

Bring yours by when you get it and lets find out!

Thank you,
Ricardo

Good idea...

waterman · 08-13-2018, 04:44 PM

I agree, nice addition to match the smoked tails and side markers.

I'm thinking that install may be a bit more of a PITA with the OEM suitcase, but worth the extra effort.

Haole · 08-13-2018, 10:57 PM

I must have some other type of OEM diffuser on my 2017 2SS. There is no way that phillip's screw is visible without pulling down on that portion of the diffuser.

While I did get these installed it was no where as simple as that video shows, unless lifting it on that lift did something. Anyway again I did get these installed and pictures are on page 2

Mahalo Phastek for these and that outstanding customer service provided to and for me
You will continue to get my business.

ChangerOfWays · 08-13-2018, 11:55 PM

Quote:

Originally Posted by Haole

I must have some other type of OEM diffuser on my 2017 2SS. There is no way that Phillip's screen is visible without pulling down on that portion of the diffuser.

Yeah, I was kinda surprised watching Phastek's video. The gap to get to the screws on my diffuser was way smaller, maybe 1/2" max - basically *just* enough to get a standard size screwdriver in. I wonder what the difference is.

Ron66Vette&10SS · 08-15-2018, 11:21 PM

Probably a stupid question, but I'll ask anyway....

They reflect white, correct?

arpad_m · 08-16-2018, 10:18 PM

Quote:

Originally Posted by Ron66Vette&10SS

Probably a stupid question, but I'll ask anyway....

They reflect white, correct?

Yes... illegal in several states, just read the relevant article for NJ again... (Should've done my research first, I'm not sure I want to be a constant pull-me-over target after all for such a minuscule enhancement in looks.)

LinPark · 10-01-2018, 01:25 PM

Has anyone done this on a convertible with the factory ground effects package? I was under the car this weekend and couldn't even spot the screw.

Sales@Phastek · 10-10-2018, 11:40 AM

We just installed them onto a 2019 ZL1. Take a look!

XXX ZL1 · 11-04-2018, 03:52 PM

Just placed my order. After seeing Mike's 19 done I had to have a set!

*mlee* · 11-04-2018, 04:02 PM

Quote:

Originally Posted by XXX ZL1

Just placed my order. After seeing Mike's 19 done I had to have a set!

They really do look good. Red on the Orange car wasn't cutting it.

LinPark · 11-04-2018, 08:41 PM

Quote:

Originally Posted by XXX ZL1

Just placed my order. After seeing Mike's 19 done I had to have a set!

Same here - placed an order today for mine after getting up under the car to make sure I could get to the screw on both sides - you can do this with a factory installed ground effects package - little harder because of the piece that goes around the quad tips but it is doable.

08-13-2018, 04:44 PM	#31
waterman Drives: Grandad's C2 L89 Join Date: May 2017 Location: 2051.50N 15629.60W Posts: 1,711	I agree, nice addition to match the smoked tails and side markers. I'm thinking that install may be a bit more of a PITA with the OEM suitcase, but worth the extra effort. __________________ 2018 ZL1 1LE sw/PDR

08-13-2018, 10:57 PM	#32
Haole 2017 SS Drives: 2017 Summit White 2SS Join Date: Feb 2009 Location: Hawaii Posts: 1,362 View My Garage	I must have some other type of OEM diffuser on my 2017 2SS. There is no way that phillip's screw is visible without pulling down on that portion of the diffuser. While I did get these installed it was no where as simple as that video shows, unless lifting it on that lift did something. Anyway again I did get these installed and pictures are on page 2 Mahalo Phastek for these and that outstanding customer service provided to and for me You will continue to get my business. Last edited by Haole; 08-14-2018 at 08:25 AM.

08-15-2018, 11:21 PM	#34
Ron66Vette&10SS Plays with Hot Wheels Drives: '17 Jet Black ZL1 Join Date: Apr 2010 Location: Derby, Kansas Posts: 849	Probably a stupid question, but I'll ask anyway.... They reflect white, correct? __________________ Previous Cars: '78 Z28, '92 Z28, '95 Z28, '85 Corvette, '01 SS, '96 Z28, '04 Z06 Corvette, '10 SS, '13 SS Hot Wheels Current Cars: '17 ZL1(daily driver), '04 Trailblazer (rain & snow), '66 Corvette (restoring)

10-10-2018, 11:40 AM	#37
Sales@Phastek Drives: 2016 1SS Join Date: Apr 2012 Location: Houston, TX Posts: 3,817	We just installed them onto a 2019 ZL1. Take a look! __________________

11-04-2018, 03:52 PM	#38
XXX ZL1 Drives: 2023 ZL1 M6 Join Date: Sep 2018 Location: Pace FL Posts: 416	Just placed my order. After seeing Mike's 19 done I had to have a set! __________________ 2024 Riverside Blue ZL1 M6 Magnuson 2650R, NW 103, Roto Fab Big Gulp, ARH 2 inch LT's, Stainless Works NPP Signature Forged 20x10.5/20x11.5, BMR springs, BMR Cradle lockout, AAD Billet Control/Trailing arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold

10-01-2018, 01:25 PM	#36
LinPark Drives: 2017 2SS Vert Hyper Blue A8 Join Date: Jun 2018 Location: Delaware, OH Posts: 43	Has anyone done this on a convertible with the factory ground effects package? I was under the car this weekend and couldn't even spot the screw.

User Name		Remember Me?
Password