What Did You Do To Your Camaro Today? - Page 1676 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Valkyrie14 · 05-24-2020, 08:04 AM

Finished up LSA conversion on my LS3.

BAD DAB · 05-24-2020, 08:27 AM

Quote:

Originally Posted by Valkyrie14

Finished up LSA conversion on my LS3.

Nice!

Mr2Hard2See · 05-24-2020, 09:51 AM

Quote:

Originally Posted by InFiD3ViL

OMFG BRO - Wow! Just...wow.

BTW, those lower flat skirts you have attached to the GFX skirts, which are those? I have been looking for a set that works well with the GFX, and those look amazing. The entire car looks amazing. Seriously man, you did this so right.

Cannot wait to see some pics of the rear end completed too.

That swap you did was great I’m following right behind you shortly. Waiting for some items to arrive. Thanks for such nice compliments on the ride I’m very pleased with the outcome ppl call my car a 6th gen. Actually someone even said it looks better than a 6th gen now lol. Here’s that swap. Heading out to buy a new supply of fresh microfiber rags so I can shoot a nice walk around. My skirt came from aerosportconcepts.com tell Kirk I sent u you may receive a 10% discount.

Mr2Hard2See · 05-24-2020, 10:38 AM

I will be add a z28 Carbonfiber diffuser and stainless quad tips. Here’s a better pic

jamie b · 05-25-2020, 11:21 AM

Installed the iroc replicas rims with 305 on the back and 285 on the front. New heritage grill, New chin splitter and new headlights. Turned out pretty good i think.

Tony Camaro · 05-25-2020, 02:22 PM

Tried to install a new bumper cover only to find out that I have a lot of missing retainer clips for the fender liners, missing fender liner bolts, missing lower bracket nuts, and when I was removing the two bolts underneath the front bumper cover one of them broke off. What a shitty car. This is something I would expect if I was working on a car that's 15+ years old. Pissed me off too because I was waiting for a dry day to come around with a reasonably decent temperature to start doing this thing and now I have to wait even longer for more parts to arrive.

Danial · 05-25-2020, 08:30 PM

Went 4-wheelin' in a 2WD Camaro SS today. Granddaughter is at the wheel.

Danial · 05-25-2020, 08:31 PM

Quote:

Originally Posted by jamie b

Installed the iroc replicas rims with 305 on the back and 285 on the front. New heritage grill, New chin splitter and new headlights. Turned out pretty good i think.

That's a good lookin' ride.

MarouG6327 · 05-25-2020, 08:58 PM

https://youtu.be/n4qyReDfjBk

6 years and counting with this guy!! Love it

0stones0 · 05-25-2020, 09:03 PM

Quote:

Originally Posted by Danial

Went 4-wheelin' in a 2WD Camaro SS today. Granddaughter is at the wheel.

Ok...I have to ask. Was that excursion out of necessity, because it was the only road to get where you needed to go or...? If you weren’t scraping the undercarriage on some of those humps, you must have been damn close!

George-CZ · 05-28-2020, 02:48 PM

A little trip with my girlfriend.
Beautiful warm weather, cars drove beautifully, what more could you want.

Spec · 05-28-2020, 07:00 PM

Quote:

Beautiful warm weather, cars drove beautifully, what more could you want.

In a Camaro? Not much else...

Fresh oil today. Mobil1 High Mileage 5w-30, with a Mobil1 20k Filter.

At 170.4k miles, still driving like a dream...

Spec · 05-28-2020, 07:00 PM

Quote:

Originally Posted by jamie b

Installed the iroc replicas rims with 305 on the back and 285 on the front. New heritage grill, New chin splitter and new headlights. Turned out pretty good i think.

Looking Outstanding!

Spec · 05-28-2020, 07:01 PM

Quote:

Originally Posted by Mr2Hard2See

I will be add a z28 Carbonfiber diffuser and stainless quad tips. Here’s a better pic

Awesome! Get those quads in!

05-24-2020, 08:04 AM	#23451
Valkyrie14 Valkyrie14 Drives: Chevrolet Camaro SS Join Date: Mar 2020 Location: Eau Claire, Wisconsin Posts: 962	Finished up LSA conversion on my LS3. Attached Images __________________ 2014 SS LS3/LSA Supercharger, 10% Super Damper, 2.55 upper, AGP Dual Pump, ID 1050 injectors, Pegasus solid rear cradle bushings, LT Headers, Roto-Fab CAI, Elite E2 catch can, E85 corn fed, 160 Thermostat, Monster Twin Disk, MGW Short Throw shifter, Tick Clutch Master Cylinder, HP Tuners, JL Audio system.

05-24-2020, 10:38 AM	#23454
Mr2Hard2See Instagram: Mr2Hard2See Drives: 2011 2SS/ RS Join Date: Apr 2018 Location: SF Bay Area Posts: 691	I will be add a z28 Carbonfiber diffuser and stainless quad tips. Here’s a better pic Attached Images __________________ YOUTUBE CHANNEL: Mr2Hard2See LSA blower BTR stg 2 cam 227/242 BTR dual springs pushrods lifters retainers etc Che bronze trunnion Ls3 timing/valley cover Dod/vvt delete Dsx e85 Dsx aux fuel pump Id1050x injectors ZL1 fuel pump, Griptech 2.55 pulley, Solo performance Mach ll 2.5 catback exhaust 1 7/8th Lt headers

05-25-2020, 11:21 AM	#23455
jamie b Drives: 2010 ss Join Date: Nov 2018 Location: dansville ny 14437 Posts: 22 View My Garage	New parts and first hand wash of the year. Installed the iroc replicas rims with 305 on the back and 285 on the front. New heritage grill, New chin splitter and new headlights. Turned out pretty good i think. Attached Images __________________

05-25-2020, 08:58 PM	#23459
MarouG6327 Drives: 2010 Camaro 2SS with RS package Join Date: Mar 2014 Location: United States Posts: 100	Made a video with my drone 😂 https://youtu.be/n4qyReDfjBk 6 years and counting with this guy!! Love it __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 12:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM

05-25-2020, 02:22 PM	#23456
Tony Camaro Drives: 2013 1LS Join Date: Apr 2019 Location: U.S. Posts: 70	Tried to install a new bumper cover only to find out that I have a lot of missing retainer clips for the fender liners, missing fender liner bolts, missing lower bracket nuts, and when I was removing the two bolts underneath the front bumper cover one of them broke off. What a shitty car. This is something I would expect if I was working on a car that's 15+ years old. Pissed me off too because I was waiting for a dry day to come around with a reasonably decent temperature to start doing this thing and now I have to wait even longer for more parts to arrive.

05-28-2020, 02:48 PM	#23461
George-CZ Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018 Location: Czech Republic Posts: 1,592	A little trip with my girlfriend. Beautiful warm weather, cars drove beautifully, what more could you want.